valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
(Default setting: 10) 6. Bluetooth Indicator • Light up Indicate blue when Bluetooth device is connected. • Blink during waiting for Bluetooth connection. • Blink quickly for Bluetooth pairing. *1 Refer to page 11 for APS. 9 Part names and functions Part names and functions Back Panel 1 2 1. DC IN Jack Connect the AC adapter. 2. AUX IN Jack Connect auxiliary components. Attaching Rubber feet Apply the accessory rubber feet to the bottom surface of the unit. 10 Getting started Getting started Turning on Press [STANDBY/ON] button. The indicator would light. This unit switches to the last select mode. APS mode • After this unit is kept inactive for 20 minutes, it automatically switches to the standby mode. • When 5 minutes before switching to the standby mode automatically, the indicator starts to blink. How to turn off the APS mode • Press and hold [Mute] button to turn off the APS mode in the standby mode and the indicator lights red for about 3 seconds. • If the APS mode is turned on again, Press and hold [Mute] button in the standby mode and the indicator lights green for about 3 seconds. Note • When you play at low volume, this unit might switch to the standby mode automatically. Please increase the volume, or turn off the APS mode. English 11 Bluetooth Audio playback Bluetooth Audio playback Bluetooth wireless technology enabled device: Cell phone Bluetooth wireless technology enabled device: Digital music player Device not equipped with Bluetooth wireless technology: Digital music player + Bluetooth audio transmitter (commercially available) This product enables you to enjoy listening to music wirelessly from a Bluetooth wireless technology enabled device (cell phone, digital music player, etc.).*1 You can also enjoy music from a non-Bluetooth wireless technology enabled device using a Bluetooth audio transmitter available in stores. For details, refer to the user manual for the Bluetooth wireless technology enabled device. Note *1 • The Bluetooth wireless technology enabled device must support A2DP profiles. • Pioneer does not guarantee proper connection and operation of this unit with all Bluetooth wireless technology enabled devices. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. Pairing this unit and Bluetooth wireless technology device To enjoy music from a Bluetooth wireless technology enabled device, pairing is required with this product. Make sure to perform pairing first time you operate the system or any time pairing data is cleared. “Pairing” is the step necessary to register Bluetooth wireless technology device to enable Bluetooth communications. For more details, see also the operating instructions of your Bluetooth wireless technology device. • Pairing is required when you first use Bluetooth wireless technology device and this unit. • To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device. 12 Bluetooth Audio playback Bluetooth Audio playback 1. Press [INPUT] button to select Bluetooth mode. (Mode Indicator: green). 2. Press and hold [PAIRING] button until you hear 2 consecutive “beep” sounds. Then, the blue indicator on the top panel blinks quickly and the unit will enter the pairing mode. 3. Switch on the Bluetooth wireless technology device that you want to perform pairing with, place the device within 1 m (3.2 ft.) of the system, and set it to the pairing mode. Pairing begins. • In case of entering PIN code, use “0000”. ( Only “0000” works for PIN code in this product. ) 4. When Bluetooth wireless technology device has connected, the blue indicator on the top panel will change from blinking to lit. 5. Start playback of music contents stored in Bluetooth wireless technology device. Connect the Latest Paired Bluetooth wireless technology Device When the unit is switch on again to Bluetooth mode next time, it will be connected automatically with equipment that has the latest connected device already. Connect previous Paired Bluetooth Device 1. If you want to connect other paired device instead of the latest paired one, please make sure the Bluetooth connection of the latest device dis-connect. Then, the blue indicator on the top panel blinks slowly and the unit will change the waiting for connection mode. *Alternatively, there is also a way to switch the unit in pairing mode. 2. Switch on other paired device, and select this unit from this device Bluetooth list. 3. Connection with other devices is successful, the blue indicator will change from blinking to lit. • Operating range of Bluetooth audio is up to 10 m (32 ft.). (Measured in open space. Walls and structures may affect range of device.) English 13 Bluetooth Audio playback Bluetooth Audio playback Radio wave caution This unit uses a 2.4 GHz radio wave frequency, which is a band used b...
Questo manuale è adatto anche per i modelli :Home theater - XW-BTS1-W (6.27 mb)