valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
In this event, increase the distance between the antenna input connector and the Bluetooth wireless technology enabled device or this unit (including products supported by this unit). • If there is something obstructing the path between this unit (including devices supported by this unit) and the device equipped with Bluetooth wireless technology (such as a metal door, concrete wall, or insulation containing tinfoil), you may need to change the location of your system to prevent signal noise and interruptions. 18 Bluetooth Audio playback Bluetooth Audio playback Scope of operation Use of this unit is limited to home use. (Transmission distances may be reduced depending on communication environment). In the following locations, poor condition or inability to receive radio waves may cause the audio to be interrupted or stopped: • In reinforced concrete buildings or steel framed or ironframed buildings. • Near large metallic furniture. • In a crowd of people or near a building or obstacle. • In a location exposed to the magnetic field, static electricity or radio wave interference from radio communication equipment using the same frequency band (2.4 GHz) as this unit, such as a 2.4 GHz wireless LAN device or microwave oven. • If you live in a heavily populated residential area(apartment, townhouse, etc.) and if your neighbor’s microwave is placed near your system, you may experience radio wave interference. If this occurs, move your unit to a different place. When the microwave is not in use, there will be no radio wave interference. Radio wave reflections The radio waves received by this unit include the radio wave coming directly from the device equipped with Bluetooth wireless technology (direct wave) and waves coming from various directions due to reflections by walls, furniture and building (reflected waves). The reflected waves (due to obstacles and reflecting objects) further produce a variety of reflected waves as well as variation in reception condition depending on locations. If the audio cannot be received properly due to this phenomenon, try moving the location of the device equipped with Bluetooth wireless technology a little. Also note that audio may be interrupted due to the reflected waves when a person crosses or approaches the space between this unit and the device equipped with Bluetooth wireless technology. English 19 Other Connections Other Connections • Before making or changing the connections, switch off the power and disconnect the power plug from the power outlet. • When playing music through AUX mode, the music volume will vary depending on the volume of the music player. If there is distortion when the volume is set at max, lower the music player’s volume and to avoid distortion. 1. Connecting auxiliary components Connect the back panel AUX IN jack to your auxiliary playback component. • This method can be used to play music on this unit from iPod/iPhone that do not support use of the dock. Digital audio player, etc. Stereo mini-plug cable (commercially available) This unit’s back panel 2. Press [AUX] button on the remote control. (Mode indicator : orange) 3. Start playback of the auxiliary component. 20 Additional Information Additional Information Troubleshooting WARNING • Never remove the casing of this apparatus. Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified even after checking the points below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. • If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert it again to return to normal operating conditions. Problem Remedy The power does not turn on. • Disconnect the power plug from the outlet, and insert again. English Power automatically switches • When no device is connected to the selected to standby without user action. the dock or the AUX IN jack and this unit is not operated for 20 minutes or more after the respective mode is selected, power will automatically turn OFF. (Only when APS mode (page13) is ON.) No sound is output when a • Make sure the component is connected correctly. mode is selected. Can’t operate the remote • Replace the battery. control. • Operate within 7 m, 30° of the remote sensor on the front panel. • Remove the obstacle or operate from another position. • Avoid exposing the remote sensor on the front to direct light. Can’t operate the iPod/iPhone. • Make sure the iPod/iPhone is connected correctly. • If the iPod/iPhone is experiencing a hangup, try resetting the iPod/iPhone, and reconnect it to the unit. 21 Additional Information Additional Information Problem Remedy The Bluetooth wireless technology device cannot be connec...
Questo manuale è adatto anche per i modelli :Home theater - XW-BTS3-W (11.94 mb)