Log:
valutazioni - 1, GPA: 4 ( )

Istruzioni per l'uso Sony, Modello DAV-TZ630

Produttore : Sony
File Size : 1 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :

Facilità d'uso


• Sony cannot accept responsibility in the event that data recorded to iPod is lost or damaged when using an iPod connected to this unit. • This product has been designed specifically to work with iPod and has been certified to meet Apple performance standards. 43GB Tuner Tuner You can preset 20 FM stations. Current station Current band and preset number FM 10 : 88.00 MHz FM 1 Press FM. 2 Press and hold TUNING +/– until the auto scanning starts. Scanning stops when the system tunes in a station. “TUNED” appears in the front panel display. When a stereo program is received, “ST” also appears in the front panel display. 3 Press SYSTEM MENU. 4 Press X/x to select “MEMORY.” 5 Press or c. A preset number appears in the front panel display. 6 Press X/x to select the preset number you want. 7 Press . “COMPLETE” appears in the front panel display, and the station is stored. 8 Repeat Steps 2 to 7 to store other stations. 9 Press SYSTEM MENU. To change the preset number Select the desired preset number by pressing PRESET +/– (page 44), then perform the procedure from Step 3. Listening to the Radio Preset radio stations in the system’s memory first (see “Presetting Radio Stations” (page 44)). 1 Press FM. 2 Press PRESET +/– repeatedly to select the preset station. 3 Adjust the volume by pressing VOLUME +/–. To listen to radio stations when you know the frequencies Press D.TUNING in Step 2, press the number buttons while holding down SHIFT to select the frequencies, then press . To listen to non-preset radio stations Use manual or automatic tuning in Step 2. For manual tuning, press TUNING +/– repeatedly. For automatic tuning, press and hold TUNING +/–. The automatic tuning stops automatically when the system receives the radio station. To stop the automatic tuning manually, press TUNING +/– or x. If an FM program is noisy If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. 1 2 3 4 Press SYSTEM MENU. Press X/x to select “FM MODE.” Press or c. Press X/x to select “MONO.” • “STEREO”: Stereo reception. • “MONO”: Monaural reception. 44GB 5 5 . 6 Press SYSTEM MENU. Tuner 45GB Sound Effect Sound Effect You can enjoy surround sound simply by selecting one of the system’s pre-programmed surround settings. Enjoying TV sound with the 5.1 channel surround sound effect 1 Press SYSTEM MENU. 2 Press X/x to select “SUR.SETTING,” then press or c. The selected item appears in the front panel display. 3 Press X/x to select “PRO LOGIC,” then press . 4 Press SYSTEM MENU. Note • When TV program sound is monaural, sound is output only from the center speaker. Selecting surround settings based on your listening preference 1 Press SYSTEM MENU. 2 Press X/x to select “SUR.SETTING,” then press or c. The selected item appears in the front panel display. 3 Press X/x to select the surround setting you want, then press . See the table below for surround setting descriptions. 4 Press SYSTEM MENU. About speaker output The table below describes the options when you connect all the speakers to the unit and you set [SPEAKER FORMATION] to [STANDARD] (page 58). Sound from Surround setting Effect “A.F.D. MULTI” (AUTO FORMAT DIRECT MULTI) • 2 channel source: The system outputs 2 channel sound from the front and surround speakers by assigning the 2 channel sound to the surround left and right channels. • Multi-channel source: The system outputs sound from the speakers depending on the number of channels of the source. 46GB Sound from Surround setting Effect Sound from Surround setting Effect “PRO LOGIC” “PLII MOVIE” “PLII MUSIC” • 2 channel source: The system simulates surround sound from 2 channel sources and outputs sound from all the speakers. – “PRO LOGIC” performs Dolby Pro Logic decoding. – “PLII MOVIE” performs Dolby Pro Logic II movie mode decoding. – “PLII MUSIC” performs Dolby Pro Logic II music mode decoding. • Multi-channel source: The system outputs sound from the speakers depending on the number of channels of the source. Sound Effect “2CH STEREO” The system outputs the sound from the front speakers and subwoofer regardless of sound format or number of channels. Multi-channel surround formats are downmixed to 2 channels. Depending on the source. “A.F.D. STD” The system discriminates the sound format of the source and (AUTO FORMAT presents sound as it was recorded/encoded. DIRECT STANDARD) Note • You cannot select the surround settings while the system is loading a disc. • Depending on the input stream, the surround settings may not be effective. 47GB Selecting the Sound Effect Selecting the Sound Effect Press SOUND MODE repeatedly during playback until the desired mode appears in the front panel display. • “AUTO”: The system automatically selects “MOVIE” or “MUSIC” to produce the sound effect depending on the source. “AUTO” appears in the front panel display. • “MOVIE”: The system provides the sound for movies. “MOVIE” appears in the front panel display. • “MUSIC”: The system p...

Questo manuale è adatto anche per i modelli :
Home theater - DAV-TZ230 (1 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie