Log:
valutazioni - 0, GPA: 0 ( )

Istruzioni per l'uso Sony, Modello DAV-DZ840M

Produttore : Sony
File Size : 1.3 mb
File Nome :
Lingua di insegnamento: en
Foto e specifiche   Sony  DAV-DZ840M
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :

Facilità d'uso


Руководство по установке динамиков Посібник з установки динаміків 4-262-762-11(1) DAV-DZ840K/DZ940K/DZ840M DAV-SZ1000W ©2011 Sony Corporation Printed in China List of parts/Liste des pieces/ 1 . . . 2 . . . 3 . . . 4 . . Tube Tube 5 . . . English Assembling the tall full stand-type speakers Spread a cloth on the floor to avoid damaging the floor when you assemble the speakers. 1 Place the base (.) on the lower part of the speaker (.), and secure it with the 3 screws (.). Be sure to use 3 screws for each speaker. 2 Fold the speaker cord (.) over about 60 cm to 70 cm and twist it. Thread the speaker cord up through the base (.) and the bottom of the lower part of the speaker (.), and out the top. Use the speaker cords as follows: For all speakers: Front left speaker (L): White; Front right speaker (R): Red For DAV-DZ940K/SZ1000W: Surround left speaker (L): Blue; Surround right speaker (R): Gray 3 Attach the upper part of the speaker (.) on top of the lower part of the speaker (.), and secure it with a screw (.). Be careful not to pinch your finger between the lower and upper parts of the speaker. 4 Connect the speaker cord. 5 Remove any slack from the speaker cord by pulling it from below the base (.), and then slide the speaker cord into the indentation at the rear of the upper part of the speaker (.). Francais Assemblage des grandes enceintes colonne Etendez un linge sur le sol afin de ne pas l’endommager lorsque vous assemblez les enceintes. 1 Placez la base (.) sur la partie inferieure de l’enceinte (.) et fixez-la a l’aide des 3 vis (.). Veillez a utiliser 3 vis pour chaque enceinte. 2 Repliez le cordon d’enceinte (.) sur 60 cm a 70 cm environ et torsadez-le. Faites passer le cordon d’enceinte a travers la base (.) et le dessous de la partie inferieure de l’enceinte (.), puis ressortez-le par le haut. Utilisez les cordons d’enceinte comme suit : Pour toutes les enceintes : Enceinte avant gauche (L) : Blanc ; Enceinte avant droite (R) : Rouge Pour le DAV-DZ940K/SZ1000W : Enceinte gauche surround (L) : Bleu ; Enceinte droite surround (R) : Gris 3 Fixez la partie superieure de l’enceinte (.) sur le dessus de la partie inferieure de l’enceinte (.) et fixez-la avec une vis (.). Veillez a ne pas coincer vos doigts entre la partie superieure et la partie inferieure de l’enceinte. 4 Raccordez le cordon d’enceinte. 5 Tendez le cordon d’enceinte en tirant dessus a partir du dessous de la base (.), puis en le glissant dans la rainure a l’arriere de la partie superieure de l’enceinte (.). .... ..... ........ .. ..... ...... .... ..... .. .... .... .... ... ....... ..... ... ....... ..... ..... ......... ). .. ) ... ...... ....... ........ ........ ........ ....... ( .. ) ... ..... ...... .. ....... ( .. 1 .. ....... ( ..... ... ....... ........ ........ ....... ....... ... ...... ) .. ) ..... ...... .. 60 .. ... 70 .. ....... ...... ... ...... ... ....... ... ....... ( .. 2 .. ... ... ....


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie