The default that most devices use/accept is: Baud Rate - 9600 Data Bits - 8 Parity - None Stop Bits - 1 Com Port Pin Configuration: Use standard pin configuration. A configuration that allows direct connection to a PC via 9-pin straight through serial cable is best. Use of only 3 pins(Transmit, Receive, Ground)is best. 9 pin female D connector Pin 2 = Transmit Pin 3 = Receive Pin 5 = Ground RS-232 interface : Commands are to be sent to the unit via RS-232 using the following format:

Also included in this manual are guidelines on how to service and care for your new Cary Audio Design product. TABLE OF CONTENTS Important Safety Instructions ......................................................... 2 Welcome Thank You .............................................................................................. 5 Product Features .................................................................................... 6 Unpacking and Installation ...................................

This will help protect the unit from lightning and power line surge damage. 13. POWER LINES: Do not locate an outside antenna system in the vicinity of overhead power lines or other electric light or power circuits. When installing an outside antenna system, take extreme care to avoid touching the power lines or circuits; contact with them could be fatal. 14. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this increases the risk of fire or elec