valutazioni - 2, GPA: 4 ( )

Produttore : Milwaukee File Size : 1.47 mb File Nome : 5fb0b586-b1e4-4edc-83c7-9b9e5a721760.pdf Lingua di insegnamento:

Always replace a damaged extension cord or have it repaired by a qualified person before using it. • Protect your extension cords from sharp objects, excessive heat and damp or wet areas. Recommended Minimum Wire Gauge for Extension Cords* Nameplate Amperes Extension Cord Length 25' 50' 75' 100' 150' 200' 0 - 5 16 16 16 14 12 12 5.1 - 8 16 16 14 12 10 -8.1 - 12 14 14 12 10 -- 12.1 - 15 12 12 10 10 -- 15.1 - 20 10 10 10 -- - * Based on limiting the line voltage drop to five volts at 150% of the rated amperes. READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE. page 5 TOOL ASSEMBLY WARNING! To reduce the risk of injury, always unplug tool before attaching or removing accessories or making adjustments. Use only specifically recommended accessories. Others may be hazardous. Removing and Replacing the Quik-Lok® Cord (Fig. 1) Fig. 1 1. To remove the Quik-Lok® Cord, turn the cord nut 1/4 turn to the left and pull it out. 2. To replace the Quik-Lok® Cord, align the connector keyways and push the connector in as far as it will go. Turn the cord nut 1/4 turn to the right to lock. Selecting a Blade Use MILWAUKEE Sawzall® Blades for best performance. When selecting a blade, choose the right type and length. Many types of blades are available for a variety of applications: cutting metal, wood, nail-embedded wood, scroll cutting, roughing-in, and contours. Many lengths are also available. Choose a length long enough to extend beyond the shoe and your work throughout the stroke. Do not use blades less than 3-1/2" long since they won't extend beyond the shoe throughout the stroke. For best performance and longest life, see “Accessories” to select the best blade for the job. Quik-Lok® Blade Clamp (Fig. 2) Unplug the tool before changing blades. Be sure the spindle and blade clamp areas are clean. Metal chips and sawdust may prevent the Quik-Lok® Blade Clamp from clamping securely. Blade CollarFig. 2 1. Depending on the job, the blade may be inserted with the teeth facing up or down. To install a blade, twist collar in the direction of the arrow while inserting the blade into the clamp until the tang butts against the collar. 2. Release collar and the spring loaded mechanism will clamp the blade firmly in place. 3. Twist collar in the opposite direction of the arrow to ensure that the blade is locked into the clamp. 4. Tug on blade to make sure it is securely locked in place. 5. To remove a blade, twist collar in the direction of the arrow while pulling on the blade. Be careful when handling hot blades. Quik-Lok® Blade Clamp Maintenance • Periodically clean dust and debris from the Quik-Lok® Blade Clamp with dry compressed air. • If the collar resists twisting, twist the collar back and forth to shake debris loose. • Periodically lubricate Quik-Lok® Blade Clamp with a dry lubricant such as graphite. Removing broken blades from the Quik-Lok® Blade Clamp Unplug the tool before removing blades. Broken blades can be removed by the following methods. • Point the tool downward, twist the collar, and shake the tool up and down (DO NOT turn the tool on while your fingers are holding the blade clamp open). The shank of the broken blade should drop out of the clamp. • If shaking the tool doesn't work... In most cases, a corner of the broken blade will extend beyond the blade clamp. Simply twist the collar and pull the broken blade out of the clamp by this corner. • If the broken stub doesn't extend far enough to be grabbed by its corner, use a thin blade with small teeth (such as a metal cutting blade) to hook the blade that is jammed in the clamp while twisting the collar and pull it out. page 6 OPERATION WARNING! To reduce the risk of injury, wear safety goggles or glasses with side shields. Adjustable Pivot Shoe (Fig. 3) The shoe can be adjusted forward or backward to six positions to take advantage of the unused portion of the blade or for special jobs requiring low blade clearance. 1/4 Turn Fig. 3 1. To adjust the shoe, pull the shoe release lever down 1/4 turn and slide the shoe forward or backward to the desired position. 2. To lock the shoe in position, push the shoe release lever up. 3. After adjusting the shoe, slowly pull the trigger to be sure the blade always extends beyond the shoe and your work throughout the stroke. DO NOT OPERATE SAWZALL WITHOUT SHOE. STRIKING THE SPINDLE AGAINST WORK MAY DAMAGE THE RECIPROCATING MECHANISM. Fig. 4 Stroke WARNING! To reduce the risk of injury, be sure the blade always extends beyond the shoe and work throughout the stroke. Blades may shatter if they impact the work or shoe (Fig. 4). Impact Protection System Select models are equipped with a unique patented gearing system that provides efficient power transmission and extended life in the most difficult cutting applications. This durable system will absorb impacts, blade lock ups, and motor stalls. These models can be used for extreme cutting applications such as large diameter pipe, thick metal, pallets, and heavy demolition and renovation ...

Scarica la tua

Per scaricare, digitare 2 cifre :