valutazioni - 3, GPA: 3.3 ( )

Produttore : Milwaukee File Size : 146.37 kb File Nome : M0333.pdf Lingua di insegnamento:

A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 13. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 14. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts. 15. If devices are provided for the of dust extraction and facilities, ensure these and properly used. Use of these devices can reduce dust-2 3 POWER TOOL USE AND CARE POWER TOOL USE AND CARE 25. Use power tools only with specifically 3. Wear ear protectors with impact designated battery packs. Use of any drills. Exposure to noise can cause Symbology other battery packs may create a risk of hearing loss. 16. Do not force the power tool. Use the injury and fire. correct power tool for your applica- 4. Hold power tools by insulated grip 26. When battery pack is not in use, keep tion. The correct power tool will do the ping surfaces when performing an it away from other metal objects like job better and safer at the rate for which operation where the cutting tool may paper clips, coins, keys, nails, screws, it was designed. contact hidden wiring or its own cord. or other small metal objects that can 17. Do not use the power tool if the switch Contact with a “live” wire will make ex- make a connection from one terminal does not turn it on and off. Any power tool posed metal parts of the tool “live” and to another. Shorting the battery terminals that cannot be controlled with the switch is shock the operator. together may cause burns or a fire. dangerous and must be repaired. 27. Under abusive conditions, liquid may 18. Disconnect the plug from the power be ejected from the battery, avoid source and/or the battery pack from contact. If contact accidentally oc- Specifications the power tool before making any curs, flush with water. If liquid con- adjustments, changing accessories, tacts eyes, additionally seek medical or storing power tools. Such preven help. Liquid ejected from the battery tive safety measures reduce the risk of may cause irritation or burns. starting the tool accidentally. 19. Store idle power tools out of the reachof children and do not allow personsunfamiliar with the power tools or SERVICE 28. Have your power tool serviced by a these instructions to operate power qualified repair person using only Catalog No. Type Volts DC RPM Drive Shank IPM Average Torque Output 9081-20 9082-20 9083-20 Impact Driver Impact Wrench Impact Wrench 14.4 14.4 14.4 0-2600 0-2600 0-2600 1/4" Hex 3/8" Square 1/2" Square 0-3300 0-3500 0-3500 740 in-lbs. 1056 in-lbs. 1404 in-lbs. tools. Power tools are dangerous in the identical replacement parts. This will hands of untrained users. ensure that the safety of the power tool 20. Maintain power tools. Check foris maintained. misalignment or binding of movingparts, breakage of parts and anyother condition that may affect thepower tool's operation. If damaged, SPECIFIC SAFETY RULES 1. Maintain labels and nameplates. have the power tool repaired before These carry important information. use. Many accidents are caused by poorly maintained power tools. If unreadable or missing, contact a MILWAUKEE service facility for a free 21. Keep cutting tools sharp and clean. replacement. Properly maintained cutting tools with sharp cutting edges are less likely to 2. WARNING! Some dust created by bind and are easier to control. power sanding, sawing, grinding, drill 22. Use the power tool, accessories and ing, and other construction activities tool bits etc., in accordance with contains chemicals known to cause these instructions and in the manner cancer, birth defects or other reproducintended for the particular type oftive harm. Some examples of thesepower tool, taking into account the chemicals are: working conditions and the work to • lead from lead-based paint be performed. Use of the power tool for operations different from those intended • crystalline silica from bricks and cement could result in a hazardous situation. and other masonry products, and BATTERY TOOL USE AND CARE • arsenic and chromium from chemically- treated lumber. 23. Ensure the switch is in the off posi- Your risk from these exposures varies, tion before inserting battery pack. depending on how often you do thisInserting the battery pack into power type of work. To reduce your exposure tools that have the switch on to these chemicals: work in tilated area, and work with 24. Recharge only with the safety equipment, such by the manufacturer. A charger masks that are specially is suitable for filter out microscopic pack may create fire when used with another Volts Direct Current Impacts per Minute Under Load (IPM) Underwriters Laboratories, Inc. 1 4 3 2 5 FUNCTIONAL DESCRIPTION Cat. No. 9082 1. 3/8" square drive shank 2. Forward/reverse switch 3. Trigger 4. Battery pack 5. Battery pack relea...

Scarica la tua

Per scaricare, digitare 2 cifre :