valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
If you have any questions about your too! please call: 1-800-9-BD TOOL (1-800-923-8665) MULTI-POSITION REVERSING SIDE HANDLE LEVER ■e'-^sCS GEARED «I CHUCK I IJk J® BRUSH «B|| INSPECTION CAP TRIGGERS WITCH RIGHT ANGLE HEAD MULTI-POSITION SIDE HANDLE GEARED_| CHUCK f REVERSING TRIGGERS LEVER WITCH BRUSH INSPECTION CAP^ IMPORTANT SAFETY INSTRUCTION, WARNING: When using electric tools, basic safety precautions sh always be followed to reduce risk of fire, electric shock, and personal ir including the following: READ ALL INSTRUCTIONS Double Insulation Double insulated tools are constructed throughout with two separate If of electrical insulation or one double thickness of insulation between yoi the tool’s electrical system. Tools built with this insulation system art intended to be grounded. As a result, your tool is equipped with a two p plug which permits you to use extension cords without concerr maintaining a ground connection. NOTE: Double insulation does not take the place of normal sa precautions when operating this tool. The insulation system is for at protection against injury resulting from a possible electrical insulation fa within the tool. CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEM PARTS. Repair or replace damaged cords. Polarized Plugs Polarized plugs (one blade is wider than the other) are used on equipme reduce the risk of electric shock. When provided, this plug will fit it polarized outlet only one way. If the plug does not fit fully into your oi reverse the plug. If it still does not fit, contact a qualified electrician to ir the proper outlet. Do not change the plug in any way. Safety Instructions For All Tools • KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. • CONSIDER WORK AREA ENVIRONMENT. Don’t expose power tools to rain. Don't use power tools in damp or wet locations. Keep work area well lit. Do not use tool in presence of flammable liquids or gases. • GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example; pipes, radiators, ranges, and refrigerator enclosures. • KEEP CHILDREN AWAY. Do not let visitors contact tool or extension cord. All visitors should be kept away from work area. • STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-up place — out of reach of children. • DON’T FORCE TOOL. It will do the job bitter and safer at the rate for which it was intended. • USE RIGHT TOOL. Don’t force small tool or attachment to do the job of a heavy-duty tool. Don’t use tool for purpose not intended. • ORESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair. • USE SAFETY GLASSES. Also use face or dust mask if operation is dusty. • DON’T A8USE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges. • SECURE WORK. Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to operate tool. • DON’T OVERREACH. Keep proper footing and balance at all times. • MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service facility, inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease. • DISCONNECT OR LOCK OFF TOOLS when not in use, before servicing, and when changing accessories, such as blades, bits, cutters. • REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. • AVOID UNINTENTIONAL STARING. Don’t carry tool with finger on switch. Be sure switch is off when plugging in. • EXTENSION CORDS. Make sure your extension cord Is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. Minimum Gage for Cord Sets Volts Total Length of Cord in Feet 120V 0-25 26-50 51-100 101-150 240V 0-50 51-100 101-200 201-300 Ampere Rating More Not more Than Than AWG , 0 ~ i 18 16 16 14 6 - 10 18 16 14 12 10 - 12 16 16 14 12 12 - 16 14 12 Not Recommended- • OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked. • STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired. • CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that...
Questo manuale è adatto anche per i modelli :Trapani e shuropopverty - 1339 (2.83 mb)
Trapani e shuropopverty - 1348 (2.83 mb)