valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
The tool should be stored in a clean and dry environment. Recommended lubricants: Use John Deere AT-4003 air tool oil or any other high grade turbine oil containing moisture absorbent, rust inhibitors, metal wetting agents and an EP (extreme pressure) additive. 3/8-Inch Power Ratchet Wrench Operator's Manual Troubleshooting Troubleshooting Loss of Power 1. Low air pressure 2. Improper lubrication or dirt build up 3. Worn motor parts, or other problems 1. Check air supply. For rated performance, 90 PSI air pressure is required at the tool, with tool operating 2. Check for wet or dirty air. Wet air tends to wash lubricant away. Dirt or foreign matter will impede the action of the motor. If dirt or water has entered the tool, flush with John Deere AT4003. 3. Contact your customer service. Specifications ITEM Drive size ----------------------------------------------3/8" Free speed --------------------------------------------160 RPM Maximum Torque ------------------------------------45 ft.-lbs. Weight -------------------------------------------------2 . lbs. Overall length ---------------------------------------10" Average Air consumption -------------------------3 CFM Hose Size ---------------------------------------------3/8" Air inlet -------------------------------------------------1/4" NPT Maximum operating pressure --------------------90 PSI 3/8-Inch Power Ratchet Wrench Operator's Manual Limited Warranty Limited Warranty Limitation of Liability. To the extent allowable under applicable law, John Deere’s liability for consequential and incidental damages is expressly disclaimed. John Deere’s liability in all events is limited to and shall not exceed the purchase price paid. Warranty Disclaimer. John Deere has made a diligent effort to provide product information and illustrate the products in this literature accurately; however, such information and illustrations are for the sole purpose of identification, and do not express or imply a warranty that the products are merchantable, or fit for a particular purpose, or that the products will necessarily conform to the illustrations or descriptions. Except as provided below, no warranty or affirmation of fact, expressed or implied, other than as stated in the “LIMITED WARRANTY” above is made or authorized by John Deere. 3/8-Inch Power Ratchet Wrench Operator's Manual Product Suitability. Many jurisdictions have codes and regulations governing sales, construction, installation, and/or use of products for certain purposes, which may vary from those in neighboring areas. While John Deere attempts to assure that its products comply with such codes, it cannot guarantee compliance, and cannot be responsible for how the product is installed or used. Before purchase and use of a product, review the product applications, and all applicable national and local codes and regulations, and be sure that the product, installation, and use will comply with them. Product Suitability. Many jurisdictions have codes and regulations governing sales, construction, installation, and/or use of products for certain purposes, which may vary from those in neighboring areas. While John Deere attempts to assure that its products comply with such codes, it cannot guarantee compliance, and cannot be responsible for how the product is installed or used. Before purchase and use of a product, review the product applications, and all applicable national and local codes and regulations, and be sure that the product, installation, and use will comply with them. Prompt Disposition. John Deere will make a good faith effort for prompt correction or other adjustment with respect to any product which proves to be defective within limited warranty. For any product believed to be defective within limited warranty, first write or call dealer from whom the product was purchased. Dealer will give additional directions. If unable to resolve satisfactorily, write to the Mi-T-M® Corporation at address below, giving dealer’s name, address, date, and number of dealer’s invoice, and describing the nature of the defect. Title and risk of loss pass to buyer on delivery to common carrier. If product was damaged in transit to you, file claim with carrier. Mi-T-M® Corporation, 8650 Enterprise Drive, Peosta, IA 52068 1-877-JD-KLEEN / (1-877-535-5336) Fax 563-556-1235 Monday - Friday 8:00 a.m. - 5:00 p.m. CST 3/8-Inch Power Ratchet Wrench Operator's Manual Introduction Felicitations de l'achat de votre nouveau la cle a cliquet 9,5 mm! Vous pouvez etre assure que votre nouveaula cle a cliquet 9 mm a ete construit avec le plus haut niveau de precision et de fiabilite. Chaque composant a ete rigoureusement teste par des techniciens pour assurer la qualite, la durabilite et la performance de ce outil pneumatique. Le cliquet John Deere est concu pour une grande variete d’applications de fixation. Cet outil est equipe d’une commande du type levier qui en facilite le fonctionnement, d’un echappement avant qui expulse l’air loin...