Log:
valutazioni - 2, GPA: 4 ( )

Istruzioni per l'uso Kawasaki, Modello 840131-1HR

Produttore : Kawasaki
File Size : 2.4 mb
File Nome : 3eece935-08e0-433b-a319-0ff230598d5c.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving Loose clothes, jewelry or long hair can be caught in moving Avoid accidental starting. Be position before inserting battery pack. Carrying power tools with your or inserting battery pack into a tool with “ON” invites accidents. Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control. Do not abuse the cord. Never use the cord to carry the tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire. A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create risk of fire. SAVE THESE INSTRUCTIONS 4 SERVICE Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel may result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. SPECIFIC SAFETY RULES AND/OR SYMBOLS TOOL USE AND CARE Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool if the power switch does not turn it “ON” or “OFF”. A tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect battery pack from tool or place the switch in the locked or “OFF” position before making any adjustments, changing accessories, or storing the Such preventative safety measures reduce the risk of starting the tool accidentally. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns or a fire. Maintain tools with care. Keep cutting tools sharp Properly maintained tools with sharp cutting edge are less likely to Check for misalignment or binding of moving other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly Use only accessories that are recommended model. Accessories that may be suitable when used on another tool. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator. Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust. Do not grasp the tool or place your hands too close to the spinning chuck or drill bit. Your hand may be lacerated or may cause injury. Secure the material being worked on. Never hold it in your hand or across your legs. Unstable support can cause loss of control and injury. Position yourself to avoid being caught between the tool or side handle walls or posts. Should the socket or bit become bound in the work, the reaction torque of the tool could crush your hand or leg. Check to see that keys and adjusting wrenches are removed Cordless Drill before switching the tool “ON”. Keys or wrenches can fly away at high velocity striking you or a bystander. When using the Cordless Drill, always maintain hands. Keep the handle of the Cordless Drill dry, clean, and free from oil and grease. Do not run the Cordless Drill while carrying...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie