valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
(Fig.5) - To fit the filling cup (1), of which the maximum capacity is 50ml, insert it into the mouth in the lid (2) and turn it clockwise so that it locks into position. (Fig.6) Caution: Do not immerse the whole jug assembly into water, always fill water into it to clean. PREPARING FRUITS OR VEGETABLES Wash or peel the fruits or vegetables that you want to liquidize. To process fruits with seeds (such as apples or pears), remove the peel and the core. Fruits or vegetables with skin (e.g. citrus fruit, melons, kiwi fruit, etc) must be peeled beforehand. Grapes must be removed from the stems before being liquidized. Cut the fruit or vegetables into pieces that can be pushed through the filling mouth. Do not use fibrous fruits or vegetables (e.g. raisins) with this blender. Fruits and vegetables used should be as fresh as possible. Fruits and vegetables contain vitamins and minerals that lose their properties when they come into contact with oxygen or light. Drink the juice just after making it. If you want to store it for a few hours, put it in glass or ceramic containers in the refrigerator. Add lemon juice to help preserve it. OPERATION AND USE Always place the blender on a flat, stable surface. Make sure that the blender is switched off (Switch in the ‘0’ setting). Plug the appliance into the mains supply. Place all of the ingredients into the jug without exceeding the 1500 ml maximum mark on the jug and put the lid on it. For best results, pour in any liquid first and add the solid ingredients as you liquidize. Turn the control knob (8) to the suitable speed setting, then the indicator lamp (9) will become light to indicate working mode. Should you wish to add more food during the process, then do it via the mouth on the lid (2). (Fig.7) Select a suitable speed for the function you intend to carry out. -Setting 0 Stop The appliance does not work. Use this setting to stop it. - Setting 1 Low speed: For light usage with liquids. Making juice from peeled fruit, such as apple, pear, etc. - Setting2 High speed: For more solid consistency foodstuffs. For shredding vegetables, cocktails, compotes, etc. - Setting turbo Pulse speed: For ice crushing. This setting provides short, powerful impulse Movements. Ice crushing function Place 4 to 6 cubes into the jug. Too much ice cubes will never ensure satisfactory results. Put the lid on the blender, then turn the control knob (8) to turbo seeting (d) 3 to 4 times, with short pauses between. Carrot Juice Cut the non-immersed carrot into 14-15mm cube. Put 400g carrot pieces into the glass jug, and then add water into the jug in 800ml marking. Blending for 5 seconds and then turn off the appliance for 1 minute, this is counted as ONE cycle. Change to use some new carrots and water after each cycle. After you finish, turn the control knob (8) to “0” setting to switch it off. Do not try to take the jug off the main body if the motor is still running. Warnings: • Please do not operate this product more than 3 minutes continuously, allow 1 minute break in between each use. This prevents motor from becoming too hot and damaged. • Do not operate the blender if it is empty. • If you have to stir in food that is stuck to the sides of the jug, switch the appliance off first. The blades may continue to rotate for a moment longer. Keep spoons or spatulas a good distance away from the blades to avoid accidents. • To ensure long lifetime of the blender, continuous operation of the appliance for more than 1 minute is not recommended, after this amount of time let the motor rest for a few minutes before switching the blender back on. • For better results when shredding solid foods, cut it up into small pieces beforehand. • When mixing dry ingredients add a cup of liquid to help the process. • Do not rapidly cool down the glass jug after blending hot foodstuff, and the other way around, do not add hot ingredients immediately after having prepared cool foodstuff. Temperature shock may damage the glass jug. Let the glass jar get first the room temperature. • Put a hand on the lid to hold it in place while blending. • Never open the lid when the blade is rotating. CLEANING & MAINTENANCE - Before cleaning any part on the blender turn the knob (8) to the “0” position (a) and unplug the appliance from the mains supply. - Remove the blade unit from the jug by turning it clockwise. -Use warm soapy water to wash all of the elements which have been in contact with the food. Take great care when cleaning the blades. -Use a damp cloth to wipe down the motor housing. Do not leave the appliance too long before cleaning, the residues might glue themselves to the inside of the jug. If this happens, use a nylon brush to remove it. Do not use harsh or abrasive cleaning agents or solvents. Don’t wash any parts in your dishwasher except the glass jug without the blade unit and the seal ring. Don’t immerse the motor unit in water or any other liquid. ADVICE ON DISPOSAL: Our goods come in optimized packagin...