valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
Make a suitable audio connection to your TV, AV receiver, or amp. 27 Connecting—Continued 1 Turn off the DPS-10.5 and your TV, and disconnect their power cords from the wall outlets. 2 Connect the DPS-10.5 to your TV as shown. 3 When you’ve completed all connections, see “Turning On the DPS-10.5” on page 38. Notes: • Before making any connections, turn off the DPS-10.5 and your TV and disconnect their power cords from the wall outlets. • Also refer to the hookup pages in your TV’s manual. • Connect the DPS-10.5’s video outputs directly to your TV. Don’t connect a VCR or other video equipment in between. Doing so may result in picture distortion, because of the copy protection system used on DVD-Video discs. • See the tables on page 24 for details on how the DPS-10.5 outputs video and audio from each output. D. Connecting an HDTV or Projector This section shows how to connect the DPS-10.5 to an HDTV (plasma, LCD) or projector. Use a commercially available component video cable (BNC) to connect the DPS-10.5’s HD VIDEO OUT COMPONENT socket to a component video input on your HDTV. Use the supplied AV cable (RCA) to connect the DPS-10.5’s D.MIX AUDIO OUT to an analog audio input on your HDTV. Notes: • The yellow plugs on the supplied AV RCA cable are not used in this example. • Don’t connect a standard TV to the HD VIDEO OUT COMPONENT socket, because you’ll get no picture. • See the tables on page 24 for details on how the DPS-10.5 outputs video and audio from each output. E. Connecting a Component with an HDMI Input This section shows how to connect the DPS-10.5 to a AV receiver, HDTV, or projector that has an HDMI input socket. What is HDMI? HDMI (High Definition Multimedia Interface) is a new connection format that can carry uncompressed, standard or high definition digital video and up to eight channels of digital audio. Until now, several separate video and audio cables have been required to connect AV components together. With HDMI, a single cable is all that’s necessary to achieve the best picture and audio quality. HDMI video is compatible with DVI (Digital Visual Interface). To send HDMI video to a DVI input requires an HDMI-to-DVI cable. The DPS-10.5 supports HDCP (High-bandwidth Digital Content Protection), and for an HDMI-to-DVI connection to work, the other component must also support it. Note that this may not work with some DVI components. 28 Connecting—Continued Using HDMI Use the supplied HDMI cable to connect the DPS-10.5’s HDMI OUT to an HDMI input on your AV receiver. Alternatively, you can connect the DPS-10.5 directly to the HDMI input on your TV. HDTV, projector ft —, — Ml- (Si © ©© © ©■ te) m (№ (8) @@ © B™ © i=£> Signal flow Notes: • Use the Digital Out/Digital 2 settings to match the HDMI output format with your HDTV (see page 71). • The DPS-10.5 supports HDCP (High-bandwidth Digital Content Protection), a protection system for digital video. HDMI components that you connect to the DPS-10.5 must also support HDCP. • The DPS-10.5 supports High-Definition Multimedia Interface Specification Information Version 1.0. • See the tables on page 24 for details on how the DPS-10.5 outputs video and audio from its HDMI OUT socket. HDMI & the DPS-10.5 When playing a DVD, or when watching an external video input source, the HDMI OUT works as follows. Selected video input HDMI Out* DVD playback (i.e., DPS-10.5) DVDb External S VIDEO VIDEO IN Externalb VIDEO VIDEO IN Externalb a. Only works with components that support HDCP (High-band-width Digital Content Protection). b. Resolutions supported by the connected TV can be selected by pressing the [Resolution] button (see page 62). On the DPS-10.5, you can select a resolution suitable for use with the connected HDTV or projector (see page 62). ■ Audio Formats The DPS-10.5’s HDMI OUT supports the following audio formats: • PCM (48 kHz, 44.1 kHz) • Dolby Digital • DTS • MPEG If your HDMI-compatible TV or projector doesn’t support Dolby Digital, DTS, or MPEG, the HDMI OUT will not output digital audio in that format. In this case, set the Digital Out/Digital 2 setting (i.e., Dolby Digital Out, DTS Out, or MPEG Out) to downmix to PCM (see page 71). To output 96 kHz PCM audio from a DVD-Video disc, set the Linear PCM Out setting to Down Sample On (see page 71). Note that audio from DVD-Audio and SACD discs is not output by the HDMI OUT. For these formats you need to use the analog multichannel output (see page 33) or i.LINK (see page 31). ■ Video The DPS-10.5’s HDMI OUT supports the following video resolutions: • 640 x 480p (VGA), 60 Hz • 720 x 480p (progressive), 60 Hz • 720 x 576p (progressive), 50 Hz • 1280 x 720p (progressive), 50/60 Hz • 1920 x 1080i (interlaced), 50/60 Hz • Through Source Resolution (external input video is output at the same resolution. DVD playback is output at 480p or 576p) If the connected HDTV or projector doesn’t support a resolution, you may get no picture. 29 C...
Questo manuale è adatto anche per i modelli :DVD-Player - DPS-10.5 (3.83 mb)
DVD-Player - DPS-10.5 (3.83 mb)