valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
Replace only with the same or equivalent type. • Do not short circuit. • Do not place the battery pack in direct sunlight or in excessively hot places (over 140°F (60°C) such as the dashboard of cars. • Use only with the specified power adapter (12VDC, 1.25A). 9 Connections Basic TV Connections You can connect the portable DVD player to a standard television using the player's Audio and Video jacks. 1 Connect the supplied audio cable (mini-plug to RCA stereo) from the Audio jack on the left side of the player to the Audio Inputs on your television. 2 Connect the supplied video cable (mini-plug to RCA video) from the Video jack on the left side of the player to the Video Input on your television. 3 Slide the AV Out/AV In switch to the AV Out position. 4 Set your TV to its appropriate Video input to view the player. Enhanced Video Connections_ For improved picture quality, you can connect the portable DVD player to a TV equipped with S-Video or Progressive Scan inputs. These connections require special cables with mini-plug adapters (not included). S-Video Connections 1 Connect an S-Video cable with mini-plug adapter (not included) from the S-Video jack on the left side of the player to the S-Video input on your television. 2 Slide the AV Out/AV In switch to the AV Out position. 3 Set the Video Output to S-Video in the player's Screen Setup menu (see page 23). • You can also press the Mode button as a shortcut to switch between S-Video and Progressive Scan modes. 4 Set your TV to its S-Video input to view the player. №№■ vidtoi AudioJ KVOII« AV in 1 Coaxial Out 1 - phones - 2 Volum^^ \ ^0<р-0<_2^0-0-0-ОшО- У OR Progressive Scan/Component Video Connections 1 Connect a Component Video cable with miniplug adapter (not included) from the P-Scan jack on the left side of the player to the Progressive Scan/Component Video inputs (Y, Pb, Pr) on your television. 2 Slide the AV Out/AV In switch to the AV Out position. 3 Set the Video Output to P-Scan in the player's Screen Setup menu (see page 23). • You can also press the Mode button as a shortcut to switch between S-Video and Progressive Scan modes. 4 Set your TV to its Progressive Scan input to view the player. 10 Connections Enhanced Audio Connections_ For enhanced audio quality, you can connect the portable DVD player to a stereo system or digital amplifier/receiver. Analog Audio Connections 1 Connect the supplied audio cable (mini-plug to RCA stereo) from the AV Out jack on the left side of the player to the left and right Audio Inputs on your stereo or 2-channel analog receiver. 2 Slide the AV Out/AV In switch to the AV Out position. 3 Set your stereo to its appropriate input to hear the player. Digital Audio Connections 1 Connect a digital coaxial cable with mini-plug adapter (not included) from the Coaxial jack on the left side of the player to the coaxial digital audio input on your digital receiver. 2 Set the Digital Out to SPDIF/PCM (Stereo) or SPDIF/RAW (Digital) in the player's Audio Setup menu (see page 24). 3 Set your receiver to its appropriate input to hear the player. External Device Connections_ You can connect an external device, such as a VCR, camcorder, or video game, to the portable DVD player. 1 Connect your external device to the audio/ video inputs on the left side of the portable DVD player: • Video - Requires mini-plug to RCA video cable (included) • Audio - Requires mini-plug to RCA audio cable (included) 2 Slide the AV Out/AV In switch to the AV In position to view your external device. 11 DVD Playback Before You Begin..._ Connect the portable DVD player to a power outlet and plug in headphones or listen to the built-in speakers. You can also connect the player to external equipment, such as a TV and/or audio system. If you do this, remember to: • Turn on your TV and select the appropriate video input. • Turn on your stereo or audio system and select the appropriate audio input. • Slide the AV Out/AV In switch to the AV OUT position. Basic DVD Playback_ 1 Press Power on. 2 Press Open A to open the disc cover. 3 Hold the edge of the disc and place it in the tray with the label side up. • Press the disk onto the spindle in the center of the tray. 4 Close the disc cover. • The portable DVD player starts playback or opens the DVD disc menu automatically. • Proceed with steps 5 and 6 when a menu is available on the disc. 5 Press 4 /►/^/^ or use the number button(s) to select the desired chapter/title. • To select a chapter/title, input the number; e.g., press “1” for chapter 1, “10” for chapter 10, etc. 6 Press ►/Select. • The player starts playback of the selected item. Viewing Disc Menus_ Press Menu. The portable DVD player stops playback, and then displays the menu screen. When not in use... When the portable DVD player is not in use, remove the disc and press Power to turn off the player. Then close the display panel. • The disc continues to rotate while the ...