valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
3 Press [3, 4] to select the menu and press [ENTER]. 4 Press [3, 4] to select the option and press [ENTER]. The screen now shows the menu again. .Some items require different operations. Follow the on-screen instructions, or read the following explanations. To return to the previous screen Press [RETURN]. To exit the SETUP screen Press [SETUP]. Changing the unit’s settings Changing the remote control code Panasonic DVD players and recorders use the same remote control system so they may respond unintentionally to a command from this remote control. Change the code on this unit and its remote control (the two must match) if you place equipment close together. .Use “1”, the factory set code, under normal circumstances. 1 While stopped Press [SETUP] to show the menus. TAB SELECT Antenna System Auto Channel Setting Channel Caption Preset Channel Caption Manual Channel Caption VCR Plusi CH Setting CATV Channel SETUP RETURN Set Up Disc Video Audio Display TV Screen 2 Press [3, 4] to select “Set Up” and press [1]. 3 Press [3, 4] to select “Remote Control Code” and press [ENTER]. 4 Press [3, 4] to select the code (1, 2, or 3) and press [ENTER]. The remote control code on the unit has been set. 5 While pressing [ENTER] on the remote control, press and hold the numbered button ([1], [2] or [3]) corresponding to the code you selected in step 4. The remote control code on the remote control has been set. 6 Press [SETUP]. The following display appears when you use a remote control with a different code. The unit’s remote control code If you are trying to use this unit’s remote control, change its code to match the unit’s (. step 5, above). Audio channel for DV input Stereo 1 :Records sound (L1, R1) when DV recording is taking place. Stereo 2 :Records added sound such as narration (L2, R2) subsequent to original recording. Mix :Records both Stereo 1 and Stereo 2. .L1rL2 are recorded in L and R1rR2 are recorded in R, except for SAP. When recording to a DVD-R or recording in LPCM audio, the audio selected in “Select MTS” (.page 53) is recorded as Stereo 1. Advanced operation 54 RQT6986 Clock settings Clock settings Preparation If you connect the unit through a cable TV box or DSS receiver (.page 58), tune to your local PBS station before starting auto clock setting. Use manual clock setting if auto clock setting does not work or if there is no local PBS channel in your area. 1 Press [SETUP] to show the menus. 2 Press [3, 4] to select “Set Up” and press [1]. SELECT TAB Off Timer Remote Control Code Clock Settings Auto Clock Setting Manual Clock Setting Re-initialize Setting 6 hr Set Code 1 SETUP RETURN Set Up Disc Video Audio Display TV Screen Channel ENTER Time Zone Adjust 0 Proceed with the steps described below. Auto Clock Setting 3 Press [3, 4] to select “Auto Clock Setting” and press [ENTER]. SETUP Set Up Disc Video Audio Display TV Screen ENTER Auto Clock Setting RETURN Connect antenna cable and if you use a cable box, tune it to your local PBS CH then... Channel Please push the ENTER key. If you have not yet set channels, the “Auto Channel/Clock Setting” screen appears. 4 Press [ENTER]. Auto setting starts. This can take some time, up to a few hours in some cases. (To stop auto clock setting, press [RETURN].) The following screen appears when setting is complete. Press [ENTER]. SETUP Set Up Disc Video Audio Displa Auto Clock Setting Auto Clock Setting is complete. 4/4/2002 12:15 AMDST............. ON TIME ZONE.... CST Channel [Note] .If the time was not set correctly, use manual clock setting or time zone adjust. .DST, Daylight Saving Time, shows the summertime setting. .TIME ZONE shows the time difference from Greenwich meantime (GMT). EST (Eastern Standard Time) = GMT j5 CST (Central Standard Time) = GMT j6 MST (Mountain Standard Time) = GMT j7 PST (Pacific Standard Time) = GMT j8 AST (Alaska Standard Time) = GMT j9 HST (Hawaii Standard Time) = GMT j10 For other areas: xx hr Manual Clock Setting 3 Press [3, 4] to select “Manual Clock Setting” and press [ENTER]. SETUP Disc Video Audio Display TV Screen Set Up ENTER Manual Clock Setting RETURN CHANGE SELECT :SAT PM MONTH DAY YEAR HOUR MINUTE 1 1 12 002000 DST TIME ZONE OFF EST Channel 4 Press [2, 1] to select the item you want to change and press [3, 4] to change the setting. MONTH(--)DAY(----)YEAR(--)HOUR (12-hour display) ^>TIME ZONE()DST()MINUTE(J DST (Daylight Saving Time): ON or OFF If you select “ON”, the clock is advanced one hour starting at 2 a.m. on the first Sunday in April and ending at 2 a.m. on the last Sunday in October. TIME ZONE (. left): EST()CST()MST()PST()AST()HST (s5) (s6) (s7) (s8) (s9) (s10) ^---------------------------------------------------------------------------------J 5 Press [ENTER]. The clock starts. [Note] When you change the time zone, the recording times for programs recorded before the time zone was changed also change to correspond to the new time zone. Time Zone Adjust Adjust the time zone (s1 or r1) if it was not set correctly wi...