valutazioni - 4, GPA: 3.5
(
)
)
|
Facilità d'uso
B.L.E. (Black Level Expansion) To select the black level of playback pictures. Set your preference and monitor’s ability. On: Expanded grey scale. (0 IRE cut off) Off: Standard grey scale. (7.5 IRE cut off) PREPARATION 19 Initial Settings - DVD (Continued) Initial Settings - DVD (Continued) LOCK (Parental Control) Rating DVD Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the area. DVD video discs may or may not respond to the parental control setting if the Area code of the disc is set wrongly. Some discs offer more suitable scenes as an alternative. Ratings are area dependent. The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable. 1. Select “Rating” on the LOCK menu then press B. 2. To access the Rating, Password and Area Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so. Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3. Select a rating from 1 to 8 using the v / V buttons. 1-8: Rating one (1) has the most restrictions and rating eight (8) has the least restrictive. Unlock : If you select unlock, parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating selection, then press SETUP to exit the menu. 5. Press OPEN/CLOSE ( ) to activate parental control. Note: If you set a rating for the player, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. Password (Security Code) You can enter or change password. 1. Select “Password” on the LOCK menu then press B. 2. Follow step 2 as shown left column (Rating). To change the password, select the “Change”, press ENTER and input the new 4-digit code then press ENTER. Input it again to verify. 3. Press SETUP to exit the menu. If you forget your Security Code If you forget your security code you can clear it using the following steps: 1. Press SETUP to display the Setup menu. 2. Input the 6-digit number “210499” and the security code is cleared. 3. Enter a new code as described above. Area Code DVD Enter the Area Code whose standards were used to rate the DVD video disc, based on the list in the reference chapter (see page 37). 1. Select “Area Code” on the LOCK menu then press B. 2. Follow step 2 as shown left (Rating). 3. Select the first character using v / V buttons. 4. Press B and select the second character using v / V buttons. 5. Press ENTER to confirm your area code selection. 20 Operation with tape Operation with tape This chapter describes how to operate the VCR and DVD. VCR Tape Playback Press the VCR button to select the device to be operated. Basic Instructions 1. Turn on the TV. 2. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. 3. Insert a pre-recorded video cassette. The indicator lights and the DVD+VCR powers on automatically. 4. If the (TIMER) indicator in the display window is lit press POWER (I/1) once. 5. If a tape without a safety tab is inserted the unit starts playback automatically. If not, press PLAY (N). 6. Press STOP (x) to stop playback. If the tape reaches the end before you press STOP (x) the DVD+VCR automatically stops, rewinds and ejects the tape. Note: It is not necessary to select the tape speed for playback because it is automatically selected by the DVD+VCR. Also, during playback the TV/VCR selector switches to VCR mode automatically. Auto Tracking Automatic tracking adjusts the picture to remove snow or streaks and beings when: • When the ATR (Auto Tracking) button is pressed. • A tape is played for the first time. • The tape speed (SP, LP, SLP) changes. • Streaks or snow appear due to scratches on the tape. Manual Tracking To manually adjust the tracking use the CH/TRK (v/V) buttons on the remote control or CH (v/V) on the front panel during playback. Notes: • Vertical jitter requires a very fine adjustment. • Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds. Search This function lets you visually search for a tape section in either direction: forward and reverse. During the high- speed picture search modes, the audio is muted and horizontal lines (noise bars) appear. Also, a short time is needed to stabilize...
Questo manuale è adatto anche per i modelli :DVD-Player - SD-KV540-S-TU (1.54 mb)
DVD-Player - SD-KV540-S-TU (1.54 mb)