valutazioni - 4, GPA: 4.3
(
)
)
|
Facilità d'uso
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly. *10: Discs Recorded in the VR (Video Recording) format cannot be played back. Unplayable Discs NEVER play back the following discs. Otherwise, malfunction may result! DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DVD-ROM for personal computers / CD-ROM for personal computers On the following disc, the sound MAY NOT be heard. Super Audio CD NOTE: Only the sound recorded on the normal CD layer can be delivered.The sound recorded on the high density Super Audio CD layer cannot be delivered. Any other discs without compatibility indications Precautions –5 – EN Setup Connections Please refer to “Basic TV Connection” on the front page before you use this unit. RF Output Channel If channel 3 has been already occupied for broadcasting, 1) Set your TV to channel 4. 2) Insert a pre-recorded tape into this unit. ) Press [SOURCE] on the unit so that the VCR OUTPUT light is lit. • If noise appears on the TV screen, press [VCR/TV] on the remote control. 4) Press [PLAY B] once. 5) After a few seconds, press and hold [PLAY B] on the unit for seconds. • The RF output channel will change to channel 4 from channel and you will see a playback picture. • When a picture does not appear on the TV screen, repeat step 4. 6) Press [STOP C] to stop playback. Hint • The RF output channel does not change when you adjust tracking during playback. In this case, stop the playback, and start the playback again. After that, press and hold [PLAY B] on the unit for seconds again. SetupHint for Cable Box or Satellite Box Select this connection when you want to view or record a scrambled channel. With this connection, channels cannot be changed on the unit. You can view or record ONLY the channels you have selected on the cable box or the satellite box. To select channels of the cable box or satellite box 1) Turn on the unit by pressing [STANDBY-ON], then press [VCR/TV]. The POWER ON indicator on the front panel will light, then press [SKIP/CH. G/K, H/L] to select channel or 4 (the same channel as the output channel of the cable box or satellite box). • If you use the channel 4, you need to change the unit’s RF output to channel 4. Refer to “RF Output Channel”. 2) At the TV, select channel or 4 (the same channel as you have selected at step 1). ) On the cable box or satellite box, select the channel you want to view or record. ANT-OUT ANT-IN RF cable (supplied) (Back of DVD/VCR) IN OUT (Back of TV) Satellite or Cable TV signal (Cable box or Satellite box) • While you are recording, only the recorded channel can be viewed. Connection to an Audio System LRVCRDVD/VCR AUDIO OUT DIGITAL AUDIO OUT or AUDIO OUT DVD S-VIDEO OUT COMPONENT VIDEO OUT L R Stereo system Analog audio input jacks AUDIO OUT (Analog) Audio cable (supplied) (DVD mode only) Hint • Playing a DVD using incorrect settings may generate noise distortion and may also damage the speaker. Audio DVD/VCR Method 1 Method 2 Dolby Digital decoder, MD deck or DAT deck COAXIAL Digital audio input jack Audio Coaxial Digital cable (commercially available) DIGITAL AUDIO OUT DIGITAL AUDIO OUT COAXIAL AUDIO OUT DVD S-VIDEO OUT COMPONENT VIDEO OUT Connection Setting SETUP > QUICK> DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to the other equipment (an MD deck or DAT deck etc.) without Dolby Digital decoder. PCM * To complete these settings, refer to pages 20-21. Hint • The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By hooking this unit up to a 5.1 channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theaters. • Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. –6 – EN Connection to a TV Connection to a TV AUDIO IN L R VIDEO IN S-VIDEO IN VCR DVD/VCR VIDEO OUT TV Method 1 Method 2 Method 3 Basic Audio Good picture Better picture Best picture Audio cable (supplied) S-Video cable Video cable (commercially (supplied) available) DVD/VCR DVD or DVD AUDIO OUT (Analog) VIDEO OUT COMPONENTDIGITAL AUDIO OUT AUDIO OUT S-VIDEO OUT L R VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUT AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT COAXIAL DIGITAL AUDIO OUT COAXIAL ANT-OUT ANT-IN AUDIO OUT DVD VCRDVD/VCR S-VIDEO OUT COMPONENT VIDEO OUT AUDIO IN VIDEO IN AUDIO OUT VIDEO OUT L LY CB CR R R VCRDVD/VCR AUDIO OUT L R Setup DIGITAL COAXIAL AUDIO OUT CB Y CR COMPONENT VIDEO IN AUDIO OUT DVD S-VIDEO OUT COMPONENT VIDEO OUT Y CB CR Component Video cable (commercially available) Hint • Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system. • The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VI...