valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
S-video/Composite video inputs — Connect an S-video or composite video signal to the appropriate female BNC connector(s), as shown here. 4 Y Y /VID /VID C C Composite video S-video input input SDI (serial digital interface) input connector — Connect an SDI signal to this female BNC connector. 5 Only DVS 406 D and DVS 406 AD models have an SDI connector. 6 Output 15-pin HD connector — Connect a display device to this female VGA-style connector for RGB output. Both outputs 6 and 7 are buffered and can be connected simultaneously to two different displays. The sync format will be the same for both outputs. Output BNC connectors — Connect coaxial cables from a display device to these BNCs for one RGBHV, RGBS, or RGsB/RsGsBs video output as follows: 7 RG B H/HVV RG B H/HVV RG B H/HVV RGBHV RGsB (Sync on Green) RGBS RsGsBs (output only if input is RsGsBs) Both outputs are buffered and can be connected simultaneously to two different displays. For RGB inputs, the output signal’s sync format is based on the format of the incoming RGB signal. For all other types of inputs, the user selects the output sync format. The sync format will be the same for both outputs. RS-232 port — This connector provides for two-way RS-232 communication. See chapter three, “Serial Communication”, for information on how to install and use the control software and SIS commands. The default protocol is 9600 baud, 1 stop bit, no parity, and no flow control. The rear panel RS-232 9-pin D connector has the following pin assignments: 8 Pin RS-232 function Description 1 – No connection2 Tx Transmit data 3 Rx Receive data 4 – No connection5 Gnd Signal ground 6 – No connection7 – No connection8 – No connection9hardwired IR IR input 51 96 DB9 Pin Locations Female DVS 406 • Installation and Operation 2-5 Installation and Operation, cont’d 9 AUDIO Audio inputs 1 through 6 — Each input has a 3.5 mm, 5-pole captive screw connector for balanced or unbalanced stereo audio input. See the following LR wiring diagrams to wire a connector for the appropriate input type and impedance level. High impedance is generally over 800 ohms. 600 ohms Tip Tip Tip AUDIO LR AUDIO LR Ring Ring Sleeve Sleeve (s) Sleeve (s) Tip Tip Tip Sleeve Ring Ring 600 ohms Unbalanced Input Balanced Input Balanced Input (high impedance) (high impedance) (600 ohms) Captive screw connector wiring for rear panel audio inputs Line level audio output — For unamplified audio output, connect an audio device, such as an audio recorder, VCR, or powered speakers, to this 3.5 mm, 5-pole captive screw connector. Follow the diagram below for correct wiring. Unbalanced Output Balanced Output 10 Tip See Caution Sleeve (s) Tip See Caution Tip Ring Sleeve (s) Tip Ring L RAUDIOAUDIO L R CAU...
Questo manuale è adatto anche per i modelli :DVD-Player - DVS 406 A (2.12 mb)
DVD-Player - DVS 406 D (2.12 mb)
DVD-Player - DVS 406 (2.12 mb)
DVD-Player - DVS 406 D (2.12 mb)