valutazioni - 5, GPA: 4.2 ( )

Produttore : Disney File Size : 886.11 kb File Nome : Lingua di insegnamento:

Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player. Moisture condensation occurs during the following cases: • When you bring the DVD player directly from a cold place to a warm place. • When you use the DVD player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit. • In summer, when you use the DVD player in a hot and humid place just after you moved the unit from an air conditioned room. • When you use the DVD player in a humid place. Do not use the DVD player when moisture condensation may occur. • If you use the DVD player in such a situation, it may damage discs and internal parts. Remove the disc, insert the small end of the AC adapter into the DC IN jack on the side of the unit and insert the other end into a conveniently located AC outlet having 120 AC, 60 Hz, turn on the DVD player and leave it “ON” for two or three hours. After two or three hours, the DVD player will have warmed up and evaporated any moisture. Keep the DVD player connected to the wall outlet and moisture condensation will seldom occur. CAUTION: To reduce the risk of injury, only charge with supplied rechargeable batteries; other types of batteries may burst causing personal injury or damage. 4 USING THE STAND 1 2 Push in on the top of the Stand to release the Stand. Pull the Stand out. 3 Carefully stand the unit. POWER SOURCES AC CONNECTION Insert the small end of the AC adapter into the DC IN jack on the side of the unit. Insert the other end (with the 2 blades) into a conveniently located AC outlet having 120V AC, 60Hz. AC Adapter Specification : 9V DC, z zz NOTE: • Use the enclosed AC adapter for this product only. • To disconnect the AC adapter, remove it from the DC IN jack on the side of the unit as well as from the AC outlet. CHARGING THE battery packss Insert the small end of the AC adapter into the DC IN jack on the side of the unit. Insert the other end (with the 2 blades) into a conveniently located AC outlet having 120V AC, 60Hz and MAKE SURE THE POWER ON/OFF SWITCH IS IN THE OFF POSITION. The CHARGE indicator will light red as the battery is charging and the FULL indicator will light green when charging has completed. Disconnect the AC adapter plugs when the charging has finished. NOTE: Fully charge the battery packs (5 hours) before using it for the first time. BATTERY NOTES: • Make sure the battery packs is charged at least once a year. • When fully charged, the unit can be used for approximately 2.5 hours. • When the unit is in the Stop mode or there is no disc inserted and no button is pressed for around three minutes, the screen saver will automatically appear in the display. If it is no button is pressed for 10 minutes, the unit will enter the Standby mode (the display will turn off) and the screen saver will disappear. Press any button to resume and to turn on again. BATTERY LOW INDICATOR When the rechargeable battery packs becomes weak, the LOW BATTERY indicator will light and you will have 15 more minutes of playing time. Charge the battery fully (3 to 3.5 hours) in this situation or use AC power. 5 POWER SOURCES (CONTINUED) POWER SOURCES (CONTINUED) REPLACING THE RECHARGEABLE BATTERY PACKS It is very rare that the rechargeable battery packs will require replacing. If you charge up the rechargeable battery for 3-3.5 hours but the battery only can playback/operate for a short period of time, then the battery packs need to be replaced. Contact customer services (contact information is on rear cover page) to purchase a new battery and follow the steps to replace the rechargeable battery packs. 1 2 Push in on the top of the Stand to release the Stand. Pull the Stand out. 3 4 Remove the screw under the Stand using a Philips screwdriver. Hold the bottom edge and pull out the rear cabinet. 5 6 Disconnect the connectors, then use a screwdriver to remove the battery packs. Insert the new rechargeable batteries to the unit. Insert the connector into the jack, making sure to align it properly as shown. 7 8 Replace the rear cabinet, making sure the three tabs are aligned to the corresponding slots on the main unit. Replace the screw. IMPORTANT: Only replace battery packs with one purchased from Memorex. Other battery packs may cause unit failure, shock, etc. 6 LOCATION OF CONTROLS LOCATION OF CONTROLS 3124567891210131411222315161718192021 1. Speaker 2. Stand (Rear of Unit) 3. Display 4. PAUSE p/Navigation Up Button* 5. Menu Button 6. Setup Button 7. Skip o/Navigation Left Button* 8. STOP (n)/Navigation Down Button* 9. ENTER/PLAY ® Button* 10. Door OPEN Button (Bottom of Unit) 11. Skip n/Navigation Right Button* 12. SEARCH AA Button 13. SEARCH ®® Button 14. Headphone 1 Jack 15. Headphone 2 Jack 16. VOLUME Control 17. Low Battery Indicator 18. Charging Indicator 19. Full Indicator 20. DC IN 9V Jack z 21. Power O...

Scarica la tua

Per scaricare, digitare 2 cifre :