Log:
valutazioni - 5, GPA: 4 ( )

Istruzioni per l'uso Panasonic, Modello DVDLV57PP

Produttore : Panasonic
File Size : 1.67 mb
File Nome : DVDLV57.PDF
Lingua di insegnamento: enfr
Vai a scaricare



Facilità d'uso


2. The recording equipment can handle a sampling frequency of 48 kHz. 3. Settings in “Audio” (. page 32, “Digital output”) have been set as follows: PCM Down Conversion: Yes Dolby Digital: PCM DTS Digital Surround: Off Using an optional car adaptor: Part number DY-DC95 DC IN 9V To the cigarette lighter socketOptional car adaptor This unit (Left side) % DC IN 9 V Note .In the interests of the traffic safety, do not perform operations on the unit or view video software while driving a vehicle. .Do not rest the unit directly on your lap for a long time. It can become hot and cause burns. Place the unit in a secure position for viewing. .You can enjoy sound through your car’s audio system by connecting a car stereo cassette adaptor (part number—RP-CC20) to this unit’s headphone jack. 36 RQT6077 Using headphones Preparations .Turn down the volume before connection, and then adjust the level. .Headphones with 3.5 mm (1.8q) stereo plug can be connected. VOL This unit (Left side) Headphones Volume [ VOL] dial (Right side) Note When headphones are connected, no sound will be output from the unit’s stereo speakers. Watching video from a video camera 1 Connect the camera to this unit. Audio/video cable IN/OUT OPT OUT AUDIOVIDEOIN/OUT (yellow)(yellow) (black) (white) (red) (included) This unit (Right side) Video camera 2 Press [IN/OUT] to switch to input mode. The “LINE-IN” indicator lights on the unit’s display. For Your Note .“LINE-IN” mode is cancelled when this unit is turned off. Press [IN/OUT] again so “LINE-IN” indicator lights on the unit’s display. .Auto power-off function (. page 14) does not work while the “LINE-IN” mode is on. Turn the unit off when you have finished using it. 37 RQT6077 Glossary Bitstream This is the digital form of multiple channel audio data (e.g., 5.1 channel) before it is decoded into its various channels. Chapter This is the smallest division on DVDs and is roughly equivalent to a track. Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be 5.1-channel audio. A large amount of audio information can be recorded on the disc using this method. Dolby Pro Logic A surround system where a 4-channel audio track is recorded as 2 channels and then is restored to 4 channels for play. The surround channel is monaural and can reproduce up to 7 kHz. DTS (Digital Theater Systems) This is a method of coding digital signals developed by Digital Theater Systems. The signals are compressed at a low ratio to maintain sound quality. Dynamic range Dynamic range is the difference between the lowest level of sound that can be heard above the noise of the equipment and the highest level of sound before distortion occurs. Field One frame is made up of 2 fields. A regular television shows these fields one after the other to create frames. Frame Frames are the still pictures that go together to make a moving picture. There are about 30 frames shown each second. For Your Reference 38 RQT6077 Frame still and field still A still is shown when you pause a moving picture. A frame still is made up of 2 alternating fields, so the picture may appear blurred, but overall quality is high. A field still is not blurred, but it has only half the information of a frame still so picture quality is lower. I/P/B MPEG 2, the video compression standard adopted for use with DVDs, codes frames using these 3 picture types. I: Intra coded picture (I-picture) This is the standard picture and is a complete picture in itself. This means it has the best picture quality and is the best to use when adjusting the picture. P: Predictive coded picture (P-picture) This picture is calculated based on past I or P-pictures. B: Bidirectionally-predictive coded picture (B-picture) This picture is calculated by comparing past and future I and P-pictures so it has the lowest volume of information. Linear PCM (pulse code modulation) PCM is the usual digital method used for music CDs. DVDs have a greater volume so they use linear PCM, which has a higher sampling rate. Playback control (PBC) This method of controlling disc play is included on version 2.0 Video CDs. You are able to interact with the disc through menus. Title This is the largest division on DVDs. Track This is the smallest division on Video CDs and CDs and usually equates to a single song. Troubleshooting Guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail consumerproducts@panasonic.com, or web site (In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, web site (or an authorized Servicentre closest to you. Reference pages are shown as black circled numbers :. Problem Solution No power. Check connections to th...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie