Do steps 1-4 (previous page). When menu appears, press STOP. 2. Press NUMBER keys to select desired track (play begins). • Check disc for track numbers. • Press “1” to start at beginning of disc. To Resume Menu use, Press STOP and press PLAY, then the menu will be displayed. Now, go to step 5 (previous page). Notes • Please read the disc jacket for operation information. • If a single sided disc is placed in upside down, “THIS TYPE OF DISC CANNOT BE PLAYED. PLEASE INSERT A DIFFERENT DISC” is displayed. • Remove disc and press DECK POWER off when not in use. • Disc continues to rotate with menu displayed even after play is done. Press STOP to clear menu display when finished with menu. 23 Timer Recording Ready Checklist All connections are made. (pp. 12 ~ 15) TV and DECK are plugged in. Clock set correctly. (p. 18) POWER Tape has rec.tab. (p. 6) Remote is in VCR mode. (Press VCR.) Sufficient tape remaining for recording time. 1 1 VCR Press PROG* to display Program. 3 To Enter More Programs, VCR mode Indicator press VCR REC Indicator TIMER Indicator VCR TIMER REC Hi -Fi to select and press SET to set an unused program number, and then repeat step 2. Or Press PROG to exit. • The “Timer” Indicator lights up on DECK. • You can do Timer Recording with the power on or off. •“TIMER REC WILL START SOON”appears on-screen for 2 minutes before Timer Recording starts. If DECK is in DVD mode, no message appears, but the VCR REC Indicator, the VCR mode indicator and “REC” will flash on Multi function Display. DT START STOP CH SPD 13 10 : 00P 12 : 00P 02 SP ---: -- : -- - --- : -- : -- - --- : -- : -- - CANCEL :ADD / DLT SELECT 1-8 : ENTER : SET EXIT : PROG 2 2 SESELE CT START DATE 13 SUN --:----:-- TODAY DATE START STOP CH SLP SELECT : SET : SET END : PROG ------------------------ 1) To set record DATE, press to select: 1~31= one time, or DAILY= MON~ FRI, or WEEKLY= same time each week and press SET. Example • See selection order left. Today ADD/DLT PROG SELECT SET 14311 12 DAILY SELECT / WEEKLY 13 Selection Order (SUN) WEEKLY (MON) WEEKLY (SAT) 2) To set remaining items, press to select and press SET to set START/ STOP times, CH (channel) or LINE input (p. 35), and tape speed (SP, LP, SLP). Press PROG to end programming. 24 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Review, Replace or Clear Program Contents: (Recording is not in progress) Press PROG To cancel a Timer to display Program List. Recording in progress... Hold down STOP in VCR mode for a few seconds to cancel the Timer Recording. (The “TIMER” Indicator goes out on Multi Function Display.) • Any future daily or weekly recording will be performed as programmed. CANCEL :ADD / DLT SELECT 1-8 : ENTER : SET EXIT : PROG DT START STOP CH SPD 7 9 : 00A 12 : 00A 08 SP 8 10 : 00P 12 : 00P 02 SP 10 8 : 00P 9 : 00P 10 SP SU 9 : 00P 10 : 00P L1 LP Press to select number and press SET to display. 3 3 To Replace program... 7 SUN 9:00A 12:00A 08 TODAY ---------------------------------------- DATE START STOP CH SP SELE CT START DATE SELECT : SET : SET BACK : END : PROG Repeat Step 2 (p. 24) to set new programs. or To Clear program... Press ADD/DLT. CANCEL : ADD / DLT SELECT 1-8 : ENTER : SET EXIT : PROG DT START STOP CH SPD : : 8 10 : 00P 12 : 00P 02 SP 10 8 : 00P 9 : 00P 10 SP SU 9 : 00P 10 : 00P L1 LP 4 4 Press PROG to end the programming. Notes • If you are using a Cable Box, the VCR’s channel for Timer Recording must be set to the Cable Box input channel and Cable Box must be manually set to the desired channel. Cable Box power must be left on. • 2 minutes before Timer Recording is performed, “PLEASE PREPARE FOR TIMER REC” appears and Timer Indicator flashes. Be sure a cassette with record tab is loaded and DECK is in Stop mode. • If a power interruption occurs while programming the timer, the timer program(s) may be canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears on-screen, please re-enter the timer programs. • If the start time for Timer Recording comes up during recording and playing back, Timer Recording will not be performed. VCR Operation Important notes when using DSS Receiver • When recording programs via DSS Receiver, DSS Receiver must be left on. • When recording programs via an antenna or cable, DSS Receiver must be turned off. 25 MTS Broadcast/ VHS Hi-Fi Stereo System Connection Make the Audio/Video Connection as shown on pp. 12 ~ 15. • You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV. Receivable Broadcast Types The following are possible audio broadcast types and on- screen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow. To display the broadcast signal being received, . ..... press DISPLAY*. MTS Stereo and SAP broadcast M...
)
