The setup display disappears. 7 Press DISPLAY repeatedly to turn off the on-screen menu. 15 Getting Started Selecting the Language for the On-Screen Display To return to the previous screen Press ORETURN. To quit while making a selection Press DISPLAY. Note The languages you can select are the ones displayed in step 4. For details, see page 50. Operation Sound Effects (Sound Feedback) The player beeps when the following operations are performed. The default setting of the Sound Feedback function is set to off. Operation Operation sound Power is turned on One beep Power is turned off Two beeps H is pressed One beep X is pressed Two beeps Playback is stopped One long beep Operation is not possible Three beeps ! A X TV 1 2 3 4 5 6 7 8 9 0 ?/1 1 Press ! on the player, then press ?/1 on the remote. The power indicator lights up in green. When there is a disc in the player, press A and remove the disc. Then press A again to close the disc tray. 2 Press and hold X on the player for more than two seconds. You will hear one beep and the Sound Feedback function is turned on. To turn off the Sound Feedback Function When there is no disc in the player, press and hold Xon the player for more than two seconds. You will hear two beeps and the Sound Feedback function is turned off. 16 Playing Discs Playing Discs This chapter describes how to play a DVD/CD/VIDEO CD. When you play a disc recorded in the NTSC color system, the player outputs the video signal or the setup display etc. in the NTSC color system and the picture may not appear on PAL color system televisions. In this case, open the disc tray and remove the disc. Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the instructions supplied with your disc. ! Playing AHPower indicator Connect headphones. Adjust the headphone volume. TV 1 2 3 4 5 6 7 8 9 0 @/1 1 Turn on your TV. Turn on the TV and select the video input so that you can view the pictures from this player. When using a receiver (amplifier) Turn on the receiver (amplifier) and select the appropriate position so that you can listen to the sound from this player. 2 Press ! to turn on the player. The player enters standby mode and the power indicator lights up in red. 3 Press A on the player, and place a disc on the disc tray. The player automatically turns on and the power indicator lights up in green. With the playback side facing down 4 Press H. The disc tray closes and the player starts playback (continuous play). Adjust the volume on the TV or the receiver (amplifier). After following Step 4 xWhen playing a DVD A DVD menu or title menu may appear on the TV screen (see page 21). xWhen playing a VIDEO CD Depending on the VIDEO CD, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. (PBC Playback, see page 22.) 17 Playing Discs Playing Discs To turn on the player Press ! on the player. The player enters standby mode and the power indicator lights up in red. Then press @/1 on the remote. The player turns on and the power indicator lights up in green. In standby mode, the player also turns on by pressing Aon the player or by pressing H. To turn off the player Press @/1 on the remote. The player enters standby mode and the power indicator lights up in red. To disconnect the power of the player, press !on the player. Notes on playing DTS sound tracks on a CD • Do not play DTS sound tracks without first connecting the player to an audio component having a built-in DTS decoder. The player outputs the DTS signal via the DIGITAL OUT OPTICAL and COAXIAL connectors even if “DTS” in “AUDIO SETUP” is set to “OFF” in the setup display, and may affect your ears or cause your speakers to be damaged. • Set the sound to “STEREO” when you play DTS sound tracks on a CD. (See “Changing the Sound” on page 31.) If you set the sound to “1/L” or “2/R”, no sound will come from the DIGITAL OUT OPTICAL and COAXIAL connectors. • If you play a CD with a DTS sound track, a loud noise may come out from the AUDIO OUT connectors, affecting your ears or causing the speakers to be damaged. Notes on playing DTS sound tracks on a DVD The signals of the DTS sound tracks are output from the DIGITAL OUT OPTICAL and COAXIAL connectors only. No sound will be output from the AUDIO OUT connectors. • If the player is connected to an audio component lacking a built-in DTS decoder, do not set “DTS” in “DIGITAL OUT” to “ON” in the setup display. Otherwise, when you play the DTS sound track, a loud noise will come out from the speakers, affecting your ears or causing the speakers to be damaged. • When you set “DTS” in “AUDIO SETUP” to “OFF”, no sound will come out from the DIGITAL OUT OPTICAL and COAXIAL connectors even if you play DTS sound tracks on DVDs. Notes • If you leave the player or the remote in pause or stop mode for 15 minutes, the screen saver image appears automatically. It will also appear if you play back a CD for more than 15 minutes. T...

Questo manuale è adatto anche per i modelli :
DVD-Player - DVP-S536D (1.06 mb)
- ()
- ()