valutazioni - 3, GPA: 3.7
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
When using a receiver (amplifier) Turn on the receiver (amplifier) and select the appropriate position so that you can listen to the sound from this player. 2 Press 1/u (POWER) to turn on the player. The indicator (red) above the 1/u(POWER) button changes to green and the front panel display lights up. 3 Press ¤, and place the disc on the disc tray. With the playback side facing down 4 Press a . The disc tray closes, and the player starts playback (continuous play). Adjust the volume on the TV or the receiver (amplifier). After following Step 4 pWhen playing a DVD A DVD menu or title menu may appear on the TV screen (see page 20). pWhen playing a VIDEO CD The menu screen may appear on the TV screen depending on the VIDEO CD. You can play the disc interactively, following the instructions on the menu screen. (PBC Playback, see page 21.) z You can turn on the player using the remote Press 1/u(POWER) when the indicator above the 1/u(POWER) button on the front panel is lit in red. Notes • If you leave the player or the remote in pause or stop mode for 15 minutes, the screen saver image appears automatically. To make the screen saver image go away, press a(If you want . to set the screen saver function to off, see page 44.) • The indicator above the 1/u (POWER) button lights up in red when the power is turned off. • If you don‘t operate the player or the remote for more than 30 minutes when a disc is not being played, the power is automatically turned off. (Auto Power Off function) 1/u (POWER) ¤=/+ aPp 1 4 7 2 3 5 8 0 6 9 1/u (POWER) 6 =/+ p · P To Operation Stop Press p. Pause Press P. Resume play after pause Press Por a. Go to the next chapter, track or scene in continuous play mode Press +. Go back to the preceding chapter, track or scene in continuous play mode Press =. Stop play and remove the disc Press 6. You can play discs in various modes such as Program Play using the on-screen menu (Control Menu). For operations of Control Menu, see page 24. Playing 17 Searching for a particular point on a disc Z You can locate a particular point on a disc by monitoring the picture, playing back slowly or playing frame by frame. / 3/# / 7 8 9 Note Depending on the DVD/VIDEO CD, you may not be able to do some of the operations described. Locating a point quickly by playing a disc fast forward or fast reverse (Speed scan) Press 3or #while playing a disc. When you find the point, press a to return to the normal speed. Each time you press the 3or #button during Speed scan, the playback speed changes. Two speeds are available. With each press, the indication changes as follows: 1), 2) (playback direction) 10, 20 (opposite direction) The playback speed of 2)/20is faster than 1)/10. Locating a point slowly by observing the screen (Slow-motion play) You can use this function only for DVDs or VIDEO CDs. Press or while playing a disc. When you find the point, press a to return to the normal speed. Each time you press the or button during Slow- motion play, the playback speed changes. Two speeds are available. With each press, the indication changes as follows: 1 ,2 (playback direction) 1 ,2 (opposite direction – DVD only) The playback speed of 2 /2 is slower than 1 /1 . Playing a disc frame by frame You can use this function only for DVDs or VIDEO CDs. Press or while playing a disc. To return to normal playback, press a . Playing Discs 18 Resuming Playback from the Point Where You Stopped the Disc (Resume Play) – you change the settings of “TV TYPE” in ”SCREEN SETUP” in the setup displayThe player stores the point where you stopped the disc – you change the settings of “PARENTAL CONTROL” in and if “RESUME” appears on the front panel display. You ”CUSTOM SETUP” in the setup display can resume playback from that point. As long as you do not open the disc tray, Resume Play is available even if you turn the power off. ap pa 1 While playing a disc, press pto stop playback. “RESUME” appears in the front panel display and “When playing next time, disc restarts from point you stopped.” appears on the TV screen. If “RESUME” does not appear, Resume Play is not available. 2 Press a . The player starts playback from the point where you stopped the disc in Step 1. z To play from the beginning of the disc When the playing time appears on the front panel display before you start playing, press p to reset the playing time, then press a. Notes • Resume Play may not be available depending on the DVD. • Resume Play is not available in Shuffle or Program Play mode. • Depending on where you stopped the disc, the player may resume playback from a different point. • The point where you stopped playing is cleared when: – you open or close the disc tray – you disconnect the AC power cord – you change the play mode – you start playback after selecting a title, chapter or track Playing 19 Playing Discs Using the Menu for Each DVD Using the title menu A DVD is divided into long sections of a picture or a music piece called “titles.” When you play a DVD wh...