valutazioni - 1, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
2 Enter your four-digit password using the number buttons. To cancel the DVD Playback setting for the disc, select “Off” (default) in step 1. Change Password Change Password b If you forgot your password, reset the recorder (page 105). Easy Setup (Resetting the Recorder) Select this to run the “Easy Setup” programme. Follow the instructions for “Easy Setup” (page 23). Settings and Adjustments Additional Information Additional Information If you experience any of the following difficulties while using the recorder, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power does not turn on. , Check that the mains lead is connected securely. The power of the recorder turns off at the same time as the TV is turned off. , This is caused by the BRAVIA Sync features. Set “Control for HDMI” to “Off” in the “System 1” setup to cancel this function (page 87). Tuner The channel is not found or stored or missed. , Make sure that your aerial is properly connected to the recorder. , Confirm with your dealer that you are in an area that can receive a digital signal. , Check your aerial installation. , When you have changed the channel settings, turn the recorder off and wait for a while to let the recorder save the settings, then turn it on again. Do not disconnect the mains lead during this procedure. , When the channel list you have set is not stored, set “Auto Service Update” to “Off” in the “Channel” setup (page 87). Picture There is no picture. , Re-connect all connecting cables securely. , The connecting cables are damaged. , Check the connection to your TV (page 16). , Switch the input selector on your TV (such as to “VCR” and “AV 1”) so that the signal from the recorder appears on the TV screen. , Check that the “Video In/Out” setup is set to the appropriate item that conforms to your system (page 91). , If you connect the recorder to your TV via only the COMPONENT VIDEO OUT jacks, set “Component Video Out” in the “Video In/Out” setup to “Progressive” (page 91). , Set “Standby Mode” to “Mode 2” in the “System 1” setup (page 87). , (For RDR-DC90/DC100/DC200/DC500) A scrambled channel is selected. , (For RDR-DC105/DC205/DC305/ DC505) A scrambled channel is selected. Insert the proper CAM (page 20). , A HD (High Definition) programme is selected. , A radio channel is selected. “No signal” appears on the TV screen. , Check that the video signal format is PAL/ SECAM. The recorder cannot play or record any other video signal formats. Picture noise appears. , If the picture output signal from your recorder passes through your VCR to get to your TV, or if you are connected to a combination TV/VIDEO player, the copy- protection signal applied to some DVD programmes could affect picture quality. If you still experience this problem even when you connect your recorder directly to your TV, try connecting your recorder to your TV’s S VIDEO input. , When you set the recorder to progressive format, hold down x (stop) on the recorder, and press Z (open/close) on the recorder. The recorder is set to normal (interlace) format. , You are playing a title recorded in a colour system that is different from your TV. , Noise may appear in the pictures recorded on the HDD, which is due to the characteristics of HDD, and is not a malfunction. , When playing a double-layer DVD, the video and audio may be momentarily interrupted at the point where the layers switch. There is no picture or picture noise appears when connected to the DV IN jack. , Try the following: 1Turn the recorder off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then connect the i.LINK cable again. There is no picture or picture noise appears when connected to the HDMI OUT jack. , Try the following: 1Turn the recorder off and on again. 2Turn the connected equipment off and on again. 3Disconnect and then connect the HDMI cable again. , The recorder is connected to an input device that is not HDCP compliant. , When picture noise appears after you change the “HDMI Resolution” setting, hold down x (stop) on the recorder, and press Z (open/close) on the recorder. There is no TV programme reception. , Set the channel manually in “Digital Manual Setting” (page 84) or “Analog Manual Setting” (page 85) in the “Channel” setup. , Select the correct source using the INPUT button, or select a channel of any TV programme using the PROG +/– buttons. You can check the currently selected input source in the front panel display. The picture is breaking up. , The signal strength is low. For digital broadcasting, you can check the signal strength using the blue button (“Signal”) in “Digital Channel List” in the “Channel” setup (page 85). , Check aerial installation. TV programme pictures are distorted. , Reorient the TV aerial. , Adjust the picture (refer to the TV’s instruction manual). , Place the recorder and TV farther apart. , Place the TV and any bunc...
Questo manuale è adatto anche per i modelli :DVD-Player - RDR-DC105 (8.7 mb)
DVD-Player - RDR-DC200 (8.7 mb)
DVD-Player - RDR-DC205 (8.7 mb)
DVD-Player - RDR-DC305 (8.7 mb)