valutazioni - 1, GPA: 4
(
)
)
|
Facilità d'uso
Sound is noisy. • Clean the disc with a cleaning cloth. Remote control The remote control does not function. • Batteries are weak. • There are obstacles between the remote control and the unit. • The remote control is far from the unit. • There are no batteries in the remote control. • Check if the unit is turned on. • The remote control is not pointed at the infrared sensor window on the unit. E7E7AUD_EN.indb 96 2007/01/29 19:04:39 EN 97 MaDniasgce ment Recording Playback Introduction Connections Basic Setup Editing Function Setup Others TROUBLESHOOTING Symptom Remedy Playback The disc does not play back. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play back certain discs (such as a CD-ROM) (page 10). • The region code on the DVD-video does not match the unit (page 10). • Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates (page 4). • If the disc was recorded on another recorder, the unit cannot play back the disc if it was not finalized. Playback image freezes for a second. • During the playback of 2 layered disc, picture may freeze for a moment when the 1st layer switches to the 2nd layer. This is not a malfunction. The disc does not start playback from the beginning. • Resume playback was activated (page 56). Press [STOP C] twice. • You have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first inserted. The unit starts playing back the disc automatically. • The DVD-video features an auto playback function. Some functions such as stop, search, or slow-motion playback cannot be performed. • Depending on the disc, you may not be able to do some of the operations. Refer to the instruction manual supplied with the disc. The language for the sound track cannot be changed. • Tracks multilingual are not recorded being played back. • The DVD-video prohibits the changing of the language for the sound track. The subtitle language cannot be changed or turned off. • Multilingual subtitle are not recorded on the DVD-video. The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back. • The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up. • The DVD-video prohibits changing angles. • Try changing the angle using the DVD-video’s menu. Recording / Timer recording / Editing External input position (L1/L2) cannot be changed while recording. • This unit is designed so. This is not a malfunction. Nothing was recorded even though you set the timer setting correctly. • There was a power failure during recording. • The unit’s internal clock stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (page 25). • The program contains copy protection signals that restricts copying. • The timer setting overlapped with another setting that has priority. Recording does not stop immediately after you press [STOP C]. • It will take a few seconds for the unit to input disc data before recording stops. Timer recording is not complete or did not start from the beginning. • The timer setting overlapped with another setting that has priority (page 40). • Disc space was not enough. • “Make Recording Compatible“ is not set to “ON”, when recording onto DVD+RW/+R that was recorded on other unit. E7E7AUD_EN.indb 97 2007/01/29 19:04:40 98 EN TROUBLESHOOTING Symptom Remedy DV DV signal cannot be input. • Before connection, turn on the power supplies for both this unit and the DVC, and make sure that these units are in stop mode. • Only a “DVC-SD” signal can be input from the DVC to this unit. Other types of signals are not supported. • Do not connect any device other than the DVC. Even if a recorder or PC with another DV terminal is connected, the DV function will not operate. • If the DVC is not recognized after connection, turn off the power supply for the unit and re-connect the DVC. The DVC cannot be operated with this unit. • Signal input or DVC operation from this unit may be disabled depending on the type of DVC. • If a DVC signal cannot be input, use an external input (L1/L2) for analog connection via audio/video cables. • DVC control may be disabled depending on the type of DVC, even in a mode other than camera mode. In this case, switch to DVD control and execute the normal recording procedure while operating the DVC. Certain functions of the unit cannot operate. • Some functions may not operate depending on the type of DVC. For example, if the DVC does not support slow playback mode, the slow playback function is disabled. • With L3 (DV), the disc display menu does not appear unless disc playback is executed. DV audio signal cannot be switched. • For recording with the DVC, the recording audio signal can b...
Questo manuale è adatto anche per i modelli :DVD-Player - D-R400KU (10.81 mb)