valutazioni - 4, GPA: 3.3
(
)
)
|
Facilità d'uso
On SCHEDULE 1) Press TV Guide. 2) Press / to select “SCHEDULE”. 3) Press / to select a TV program you have set to record. 4) Press Menu. “Episode Options” appears. / to select “delete recording”, then press ENTER. 6) Read the message, and press 5) Press / to select “yes” (if you want to delete), then press ENTER to exit. Correcting a recording 1) Press TV Guide. 2) Press / to select “SCHEDULE”. 3) Press / to select a TV program you have set to record. 4) Press Menu. “Episode Options” appears. / to select “edit recording”, then press ENTER. 5) Press “Record Options” appears. 6) Change the selections. 7) Press / to select “schedule recording”, then press ENTER. To stop a scheduled recording 1) Press TV Guide. 2) Press / / / to select the TV program currently being recorded. 3) Press REC repeatedly until the recording icon disappears. Turning the power off automatically after completing a scheduled recording 1) While executing a scheduled recording, press QUICK MENU. Quick Menu appears. / to select “Auto power off” then press ENTER. 2) Press Keeping the power on even after the scheduled recording finished If the recorder turns itself on to execute a scheduled recording, it will turn itself off after finishing the recording. You can restrict this and keep the recorder powered on. 1) While executing a scheduled recording, press QUICK MENU. 2) Press / to select “Continuous power on” then press ENTER. Introduction Recording PlaybackEditing Library Function setup Others 51 Recording Others To delete recorded content Important note Any deleted title/chapter (original) cannot be restored. Before deleting, be sure to check contents on the disc. ENTER / / / DELETE 1) Perform steps 1 and 2 in “Playing recorded contents (CONTENT MENU)” ( page 57) to select a title (chapter). 2) Press DELETE button. Alternate method: / buttons to select “Title delete” (“Chapter delete”) and press ENTER button. 3) Read the message and press Press QUICK MENU button, then press the / buttons to select “Yes,” then press ENTER button. Notes • Deleting a title (a chapter) decreases the numbers of the succeeding titles (chapters). • A chapter for under 5 seconds or shorter may not be deleted. Deleting a short chapter may not change the display of the available disc volume. • Deleting a playlist title/chapter does not affect the original title/chapter. • Deleting an original title/chapter affects all the corresponding playlist title/chapters. • Deleting all chapters in a title erases the title itself. • Titles and chapters which contain still pictures cannot be deleted. • On a DVD-R/RW disc, deleting is not possible if the disc is finalized ( page 132). • Chapters in a DVD-R/RW disc cannot be deleted. • On a DVD-RW disc, only the last title recorded can restore the disc capacity by being deleted. • On a DVD-R disc, deleting cannot restore the disc capacity. To protect recorded content You can protect recorded contents of the HDD or a DVD-RAM disc from unexpected deletion. Protection is provided for each title (original). 1) Perform steps 1 and 2 in “Playing recorded contents (CONTENT MENU)” ( page 57) to select a title. 2) Press QUICK MENU button, and press / buttons to select “Title information”. Then press ENTER button. 3) Press QUICK MENU button, and press / buttons to select “Lock” and then press ENTER button. appears. The mark Notes • To cancel protection, repeat this procedure. • Disc initialization erases all titles on a disc even if they are protected. • Executing “All HDD titles delete”( page 164) erases all titles on the HDD even if they are protected. Relay Recording HDD DVD-RAM Relay Recording HDD DVD-RAM This function automatically diverts a recording to the HDD if a DVD-RAM disc is near capacity. When the remaining time of the DVD-RAM disc has reached about 10 minutes, the recorder starts recording the same content on the HDD as well as DVD-RAM. The chapter marks are automatically made at the start and end points of the overlapped recording portion. You can delete the unnecessary overlapped portion afterwards by referring to the chapter marks. DVD-RAM disc Recording end Recording start 10min. HDD To engage the Relay Recording function, set “Relay recording” to “On” ( page 163). Notes • When the capacity of the HDD is not sufficient, the operation is canceled. • While recording the overlapped portion, you cannot pause the recording. • While recording the overlapped portion, you cannot play a recorded title on the same disc. • When another programmed recording is set just after the relay recording, the relay recording stops about 2 minutes before the next programmed recording starts. Technical Information About recording time The recording time of a typical VCR (Video Cassette Recorder) is determined by the length of a video tape and recording speed (SP, LP, etc.). Video tapes with various recording times are available on the market. On the other hand, the recording time of a DVD-RAM/ R/RW depends on the bit rate (Mbps: amount of data...
Questo manuale è adatto anche per i modelli :DVD-Player - RD-XS34SU (6.8 mb)