valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Repeat the program playback 0 During playback of the programmed tracks, press the REPEAT key.The programed tracks can be played again. Disc Lock When the disc is locked, the player will store its specific code into the memory for future identification. For the next playback, the DVD player will prompt you to enter the password. Then, press OK to load the disc. Screen Saver This function is used to turn the screen saver on or off. 1 Press the 34 keys to highlight SCREEN SAVER in the GENERAL SETUP menu. 2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to highlight the selected item. U ON: In STOP or No DISC mode, if no actions are performed within 5~6 minutes, the screen saver will be activated. U OFF: Screen saver is disabled. 4 Press OK to confirm. 5 Press the 1 key to return to the GENERAL SETUP menu. 1 Press the 34 keys to highlight DISC LOCK in the GENERAL SETUP menu. 2 Enter its submenu by pressing the 2 key. . LOCK: Lock the disc being played. . UNLOCK: unlock the disc. 3 Press the 1 key to return to the GENERAL SETUP menu. NOTE: 1. When a locked disc is loading, the DVD player will prompt you to enter your password (842100 is the default password). 2. To change the password , refer to the option PASSWORD in the PREFERENCE SETUP menu . 19 Setup Menu English Analog Audio Setup menu This menu contains setup options for your analog audio output, such as DOWNMIX, D.R.C. (Dynamic Range Compression), 3D etc. which makes the DVD player reproduce high quality surround sound. 1 Press SYSTEM MENU. 2 Press the 34 keys to highlight the ANALOG OUTPUT SETUP. 3 Press OK to confirm. DOWNMIX 1 Press the 34 keys to highlight the DOWNMIX. 2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to highlight the selected item. 0 LT/RT . This option should be used only if your DVD player is connected to a Dolby Prologic decoder. 0 STEREO . This option will downmix Dolby Digital signals directly into analogue stereo from L/R sockets. 4 Press OK. 5 Press the 1 key to return to the ANALOG OUTPUT SETUP menu. D.R.C. (Dynamic Range Compression) 3 Move the cursor by pressing the 34 keys to highlight the selected item. . ON: Enable D.R.C. U OFF: Disable D.R.C. 4 Press OK. 5 Press the 1 key to return to the ANALOG OUTPUT SETUP menu. 3D Sound The 3D SOUND can simulate the echoes and frequencies that may be available in a par ticular environment. 1 Press the 34 keys to highlight the 3D. 2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to highlight the selected item. U ON: Enable 3D sound effect. U OFF: Playback the disc with original sound effects. 4 Press OK. Digital Audio Setup menu In this menu, you can set up the digital audio output signal from the digital terminals, such as coaxial etc. 1 Press SYSTEM MENU to enter the SETUP menu. 2 Press the 34 keys to choose the DIGITAL OUTPUT SETUP. 3 Press OK. The DVD player will compress the dynamic range of its sound output for late-night listening. 1 Press the 34 keys to highlight D.R.C.. 2 Enter its submenu by pressing the 2 key. 20 Setup Menu Digital Output 1 Press the 34 keys to highlight DIGITAL OUTPUT. 2 Enter its submenu by pressing the 2 key. 3 Press the 34 keys to highlight the selected item. U ALL: Original digital signal is output. U PCM ONLY: If your receiver is PCM- compatible, or your receiver can not decode MPEG-2, Dolby Digital, or DTS audio, choose this option. 4 Press OK. 5 Press the 1 key and return to the DIGITAL OUTPUT SETUP menu. Note: If DIGITAL OUTPUT is set to ALL, all audio settings except MUTE are invalid. LPCM Output If you connect the DVD player to a PCM compatible receiver via the digital terminals, such as coaxial etc, you may need to select LPCM OUTPUT. Discs are recorded at a cer tain sampling rate.The higher the sampling rate, the better the sound quality. 1 Press the 34 keys to highlight the LPCM OUTPUT. 2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to highlight the selected item. U 48K: Playback a disc recorded at the sampling rate of 48kHz. U 96K: Playback a disc recorded at the sampling rate of 96kHz. 4 Press OK. 5 Press the 1 key to return to the DIGITAL OUTPUT SETUP menu. English 21 EnglishEnglish Setup Menu Video Setup menu There are items included in VIDEO SETUP menu such as TV TYPE, TV DISPLAY, SMART PICTURE, COLOR SETTING. 1 Press STOP. 2 Press SYSTEM MENU to enter the menu. 3 Highlight VIDEO SETUP by pressing the 34 keys. 4 Press OK. TV Type Before viewing the DVD or VCD, ensure that the PAL or NTSC setting of the system matches your TV set. 1 Press the 34 keys to highlight TV TYPE in the VIDEO SETUP menu. 2 Enter its submenu by pressing the 2 key. 3 Move the cursor by pressing the 34 keys to highlight one option. 4 Press OK. 5 Press the 1 key to return to the VIDEO SETUP menu. NTSC/PAL Conversion This player is equipped with a NTSC/PAL conversion feature to conver t the video output of the disc to match you...