valutazioni - 2, GPA: 4.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
DVD-Player - DVP-NS410 (1.41 mb)
DVD-Player - DVP-NS410 (1.35 mb)
Facilità d'uso
If the DVD is recorded with multilingual tracks, you can also change the language. With CDs, DATA CDs, or VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. For example, when playing a disc containing a song with the vocals on the right channel and the instruments on the left channel, you can hear the instruments from both speakers by selecting the left channel. DISPLAY DVP-NS305 DVP-NS310/405/410 1 Press (audio) during playback. The following display appears. The number in parentheses indicates the total number of available audio signals. 1(4):ENGLISH 2 Press (audio) repeatedly to select the desired audio signal. . When playing a DVD Depending on the DVD, the choice of language varies. When 4 digits are displayed, they indicate a language code. Refer to “Language Code List” on page 69 to see which language the code represents. When the same language is displayed two or more times, the DVD is recorded in multiple audio formats. . When playing a VIDEO CD, CD, or DATA CD (MP3 audio) The default setting is underlined. •STEREO: The standard stereo sound • 1/L: The sound of the left channel (monaural) • 2/R: The sound of the right channel (monaural) Checking the audio signal format If you press DISPLAY repeatedly during playback, the format of the current audio signal (Dolby Digital, MPEG audio, DTS, PCM, etc.) appears as shown below. Example: Dolby Digital 5.1 ch Rear (L/R) 3 / 2 .1DOLBY DIGITAL Front (L/R) LFE (Low Frequency + Centre Effect) About audio signals Audio signals recorded in a disc contain the sound elements (channels) shown below. Each channel is output from a separate speaker. • Front (L) • Front (R) •Centre •Rear (L) •Rear (R) • Rear (Monaural): This signal can be either the Dolby Surround Sound processed signals or the Dolby Digital sound’s monaural rear audio signals. • LFE (Low Frequency Effect) signal Note If “DTS” is set to “OFF” in “AUDIO SETUP,” the DTS track selection option will not appear on the screen even if the disc contains DTS tracks (page 63). TV Virtual Surround Settings (TVS) When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. This function is designed to work with the LINE OUT L/R (AUDIO) and LINE (RGB)TV jacks. Note that if you select one of the TVS settings, the player does not output the following signals from the DIGITAL OUT (OPTICAL or COAXIAL) jack. • Dolby Digital signals (when you set “DOLBY DIGITAL” in “AUDIO SETUP” to “D-PCM”) (page 63) • MPEG audio signals DVP-NS305 DVP-NS310/405/410 Sound Adjustments SUR DISPLAY ENTER 1 Press DISPLAY twice during playback. The following Control Bar appears. ,continued 2 Press C/c to select (SURROUND), then press ENTER repeatedly to select one of the TVS sounds. Refer to the following explanations given for each item. • TVS DYNAMIC •TVS WIDE • TVS NIGHT • TVS STANDARD TVS DYNAMIC To cancel the setting Select “OFF” in Step 2. To turn off the Control Bar Press DISPLAY repeatedly until the Control Bar is turned off. .TVS DYNAMIC Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV .TVS NIGHT Large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you want to hear the dialog and enjoy the surround sound effects of “TVS WIDE” at low volume. .TVS STANDARD Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. Use this setting when you want to use TVS with 2 separate speakers. L R TV .TVS WIDE Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. L: Front speaker (left) R: Front speaker (right) : Virtual speaker z Hint You can also change the setting by pressing SUR (or SURROUND on the player) repeatedly. Notes • When the playing signal does not contain a signal for the rear speakers, the surround effects will be difficult to hear. • When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver). • Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. •...
Questo manuale è adatto anche per i modelli :DVD-Player - DVP-NS305 (1.35 mb)
DVD-Player - DVP-NS310 (1.35 mb)
DVD-Player - DVP-NS405 (1.35 mb)