|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Source Jack/ Setting HDMI OUT PCM Stereo PCM Multi-Ch DTS Re-encode * 3 Primary Pass-Thru * 1, * 2 Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 7.1ch DTS Dolby Digital Plus Dolby TrueHD PCM 2ch PCM 7.1ch DTS Dolby TrueHD DTS PCM 2ch PCM 5.1ch DTS DTS DTS-HD PCM 2ch PCM 5.1ch DTS DTS-HD Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS PCM 5.1ch Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS PCM 7.1ch Notes: * 1 The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and secondary audio.) * 2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [HDMI] option is set to [Primary Pass-Thru]. 15 * 3 If the [HDMI] or [SPDIF] option output is limited to 48 kHz and 5.1 • The audio is outputted as PCM 48 kHz/file and PCM 44.1kHz/16 bit for Audio CD while playback. Resolution Setting The player provides several output resolutions and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] RESOLUTION button in stop mode. Note: Since several factors affect the resolution of video output, see “Available resolution according to the resolution setting” on next page. How to change the resolution using RESOLUTION button Press RESOLUTION repeatedly in stop mode to change the resolution. The display window will show you the current resolution. How to change the resolution using the [Setup] menu 1 Press HOME and the [Home Menu] appears. 2 Select the [Setup] and press ENTER. The [Setup] menu appears. 3 Use v / V to select [DISPLAY] option then press B to move to the second level. 4 Use v / V to select the [Resolution] option then press B to move to the third level. 5 Use v / V to select the desired resolution then press ENTER to confirm your selection. Note: If you select a resolution that your HDMI TV does not accept or select the 1080p resolution with COMPONENT VIDEO OUT connection, the warning message will appear and then ask you to keep the selected resolution setting. If you do not respond to the question for 10 seconds, the resolution will automatically revert back to the previous resolution. 16 Available resolution according • When the non-copy protected media Video Output Resolution Setting HDMI OUT COMPONENT VIDEO OUT 576i 576i 576i 576p 576p 576p 720p 720p 720p 1080i 1080i 1080i 1080p / 24Hz 1080p / 24Hz 1080p / 50Hz * 1, * 2 1080p / 50Hz 1080p / 50Hz 1080p / 50Hz * 2 • When the copy protected media is playing back Video Output Resolution Setting HDMI OUT COMPONENT VIDEO OUT 576i 576i 576i 576p 576p 576p 720p 720p 576p 1080i 1080i 576p 1080p / 24Hz 1080p / 24Hz 576p * 1 1080p / 50Hz 1080p / 50Hz 576p Notes: • Depending on your display, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press HOME then RESOLUTION repeatedly until the picture re-appear. • This player supports simultaneous output of all video out jacks. The resolution of the HDMI output will not be the same as the resolution output on the component video output. * 1 When the 1080p/24Hz video source the VIDEO OUT and COMPONENT VIDEO OUT will not output any video signal. * 2 Even if the resolution is set to 1080p, non-DVDs playback are outputted at 1080i resolution. HDMI OUT connection • If you select a resolution manually and then connect TV and your TV does not accept it, the resolution setting is set to [Auto]. • The 1080p video output frame rate may be automatically 24Hz or 50Hz depending both on the capability and preference connected TV and based on the native video frame rate of the content on the BD-ROM disc. COMPONENT VIDEO OUT connection • For the 720p, 1080i, 1080p resolution setting with protected media, real output resolution of COMPONENT VIDEO OUT will be outputted at 576p resolution. • BD or DVD video stream could prevent up-scaling on analog output. VIDEO OUT connection The resolution of the VIDEO OUT jack is always outputted at 576i resolution. 17 18 Internet connection This player can be connected to a local area network (LAN) via the LAN port on the rear panel. After making the physical connection the player needs to be set up for network communication. This is done from the [Setup] menu — see “[NETWORK] Menu” on page 26 for detailed instructions. Connect the player’s LAN port to the corresponding port on your Modem or Router using a LAN cable. Use a commercially available straight LAN cable (Category 5/CAT5 or better with RJ45 connector). By connecting the unit to broadband Internet, you can use software update, BD-Live features and YouTube features. Cautions: • When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock. • Do not connect a modular phone cable to the LAN port. •...