valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
2 Press the POWER button to turn on the radio and TV. Setting the time To set the time: 1 With the power off, press and hold the PLAY MODE/PROG MEM/ CLOCK SET button on the radio or the MEM/CLK SET/RAND button on the remote control until the display shows “12 hr.” or “24 hr.” 2 Press one of the SKIP/CLOCK/TUNING buttons on the radio or one of the SKIP/TUNE / buttons on the remote control to select the 12-hour clock or the 24-hour clock. 3 Press the PLAY MODE/PROG MEM/CLOCK SET button on the radio or the MEM/CLK SET/RAND on the remote control again until the hour digits begin flashing, then press one of the SKIP/TUNE / buttons on the remote to either increase or decrease the hours shown. 4 Press the PLAY MODE/PROG MEM/CLOCK SET button on the radio or the MEM/CLK SET/RAND on the remote control again until the minute digits begin flashing, then press one of the SKIP/TUNE / buttons to either increase or decrease the minutes shown. 5 Press the PLAY MODE/PROG MEM/CLOCK SET button on the radio or the MEM/CLK SET/RAND on the remote control again to exit. Listening to your radio To listen to your radio: 1 Press the POWER button to turn on your radio. 2 Press the FUNCTION button one or more times until “ ” appears on the display. 3 Press the STOP/BAND button to select AM or FM. 4 Press and hold one of the SKIP/TUNE / buttons to go to an available radio station. 5 Press one of the VOL buttons (+ or –) to adjust the volume. NS-C2115 Under-counter DVD Player/Clock Radio Improving reception Your clock radio has an FM antenna on the back. If you are listening to an FM station and the reception is poor, move the antenna until reception improves. If you are listening to an AM station and reception is not clear, rotate your radio slightly until reception improves. FMAM Programming radio station presets You can program as many as 10 FM and 10 AM radio station presets. You can tune to the preset stations by pressing the PLAY/PAUSE/MEM UP or REPEAT/MEM DN buttons on the clock radio, or the PLAY/PAUSE/MEM UP or MEM-DN/REPEAT buttons on the remote control. To program a radio station: 1 Press the POWER button to turn on your radio. 2 Press the FUNCTION button one or more times until “ ” appears on the display. 3 Press the STOP/BAND button to select AM or FM. 4 Press one of the SKIP/CLOCK/TUNING buttons (up or down) on the clock radio, or one of the SKIP/TUNE / buttons on the remote control to select a radio station. 5 Press and hold the PLAY MODE/PROG MEM/CLK SET button on the clock radio or the MEM/CLK SET/RAND button on the remote control to activate the programming mode. 6 Press one of the SKIP/CLOCK/TUNING buttons (up or down) on the clock radio, or one of the SKIP/TUNE / buttons on the remote control to select the preset number you want to assign the station to. NS-C2115 Under-counter DVD Player/Clock Radio 7 Press the PLAY MODE/PROG MEM/CLK SET button on the clock radio or the MEM/CLK SET/RAND button on the remote control to store the station with the preset number you selected. 8 Repeat Steps 4 through 7 to program additional presets. Tuning to a radio station preset To tune to a radio station preset: 1 Press the POWER button to turn on your radio. 2 Press the FUNCTION button one or more times until “ ” appears on the display. 3 Press the BAND button to select AM or FM. 4 Press the PLAY/PAUSE/MEM UP or REPEAT/MEM DN buttons on the clock radio, or the MEM-UP or MEM-DN/REPEAT button on the remote control until the preset number you want appears on the display. Setting the equalizer You can adjust the sound by selecting an equalizer mode. To select an equalizer mode: • Press the EQ button one or more times to select the mode you want. You can select: •CLASSIC •JAZZ •ROCK •POP Watching your TV To watch your TV: 1 Connect a 75 Ohm cable TV or antenna cable to the TV ANTENNA connection on the back of the radio. TV ANTENNA NS-C2115 Under-counter DVD Player/Clock Radio 2 Swing the LCD screen down into viewing position and turn the screen to a convenient viewing angle. 3 Press the POWER button to turn on your TV. 4 Press the FUNCTION button one or more times until TV appears on the display. 5 Press the one of the TV CHANNEL buttons (up or down), or press the number buttons on the remote control to select a channel. If you’re using your TV for the first time, you must program the available TV channels into memory. See “Programming TV channels into memory” on page 13. Note 6 Press one of the VOL buttons (+ or –) to adjust the volume. Programming TV channels into memory To program TV channels into memory: 1 After connecting the antenna and turning on the power, press the MENU button on your radio twice. The TUNING menu opens. 2 Press the NAVIGATION button repeatedly until AUTO SCAN is selected. 3 Press the TV CHANNEL DOWN button to begin the auto scan process. Auto scan takes a few minutes to complete. 4 Press the MENU button again to close the on-screen menu...