valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
After recording, the unit’s power shuts off automatically. ATTENTION: . When you record programmes by connecting to a digital terrestrial receiver (Freeview receiver or similar), perform the same steps as AAutomatic Satellite Programme RecordingB (Apg. 42). . Be sure not to turn on the satellite receiver before the programme is executed. Otherwise, the unit will start recording when the satellite receiver’s power is turned on. . If you have connected another appliance other than a satellite receiver to the [L-2 IN] connector, be sure not to engage the Automatic Satellite Programme Recording mode. Otherwise, the unit will start recording when the connected appliance’s power is turned on. . Automatic Satellite Programme Recording and timer recording cannot be done at the same time. SAT j REC MODE . Make sure the satellite receiver is connected to the unit’s [L-2 IN] connector. . Programme the timer on the satellite receiver. 1 Set AL-2 SELECTB to ASAT VIDEO/RGBB or ASAT S-VIDEO/ RGBB. (Apg. 58) . Also refer to AIMPORTANTB on page 59. 2 Press REC MODE repeatedly to set the recording mode. 3 Press and hold SATj for about 2 seconds to engage the Automatic Satellite Programme Recording mode. ASAT jB and AVB appear on the front display panel and the unit turns off automatically. NOTES: . To disengage the Automatic Satellite Programme Recording mode, press SATj. . If the unit’s power is off, it is not possible to engage the Automatic Satellite Programme Recording mode. . In step 3, if AVB blinks quickly on the front display panel even though your satellite receiver’s power is off, Automatic Satellite Programme Recording will not work properly with that satellite receiver*. If this is the case, perform AManual Timer ProgrammingB (Apg. 38) to timer record a satellite programme. * Some satellite receivers output signals even if the power is off. Automatic Satellite Programme Recording is not possible with those satellite receivers. . AVB blinks on the front display panel while Automatic Satellite Programme Recording is in progress. . For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver. . Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer. . Pressing the unit’s A button while Automatic Satellite Programme Recording is in progress turns off the unit’s power and disengages the Automatic Satellite Programme Recording mode. . If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording, it is not possible to set different recording modes for each programme. . Depending on the type of satellite receiver, the unit may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme. . If you engage the Automatic Satellite Programme Recording mode when the satellite receiver’s power is on, the unit will not start Automatic Satellite Programme Recording even though AVB blinks on the front display panel. When the satellite receiver shuts off once and is turned back on again, the unit starts recording. . When the Automatic Satellite Programme Recording mode is engaged, or the unit’s power is turned off after Automatic Satellite Programme Recording is finished, the unit will not enter the timer mode even though AAUTO TIMERB is set to AONB. . Just Clock (Apg. 66) does not work when the Automatic Satellite Programme Recording mode is engaged. Filename [M150SEK_08Navigation.fm] M150SEK_00.book Page 43 Wednesday, June 15, 2005 4:04 PM Masterpage:Right0 NAVIGATION EN 43 Library Database Navigation The Library Database Navigation enables you to search and select the desired titles recorded very easily. You can record up to 99 titles on a disc. Each time a title is recorded, the information of the title is registered for the Library Database Navigation automatically. So, you can confirm the information of the titles recorded with the Library Database Navigation screen. And, you can also select one of the titles recorded using the Library Database Navigation. The following screen appears as the Library Database Navigation screen when you press NAVIGATION. You can move the arrow to select the desired position on the screen by pressing the selection keys on the remote control. A B CDE 00011/61234FGHREMAIN TIME 87min(SP) DANCE CURNIV 28/07/03 MON10:00 - 11:00 PR. 7 SP 60min [OTHERS] MODIFY DELETE EDITING PROTECT ORIGINAL PLAY LIST LIBRARY DANCE SELECT WITH [CURSORS] THEN PRESS [ENTER] EXIT OK SELECT NAVIGATION A INDEX (Thumbnail of each programme) B Menu index ORIGINAL (Apg. 44) PLAY LIST (Apg. 47) LIBRARY (Apg. 51) C Remaining time (Based on the recording speed currently selected) D Current/Total number of programme(s) E Icons F Recording information for the programme indicated by the arrow G Guidance for operations H Operational commands The Icons and their meanings Using Library Database Navigation system, you can ...