valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
The wires in the mains lead are coloured in accordance with the following code: If these colours do not correspond with the terminal identifications of your plug, connect as follows: Blue wire to terminal coded N (Neutral) or coloured black. Brown wire to terminal coded L (Live) or coloured Red. If in doubt — consult a competent electrician. Blue to N (Neutral) or Black Brown to L (Live) or Red The C/Bbutton does not completely shut off mains power from the unit, but switches operating current on and off. ABB shows electrical power standby and ACB shows ON. Safety Precautions for the Burner Be sure to observe the following precautions. Failing to do so may result in electric shock, fire, injury, or malfunction. . Do not disassemble, dismantle, or modify the equipment. Requests for repair and inspection should be made to the dealer. . Do not insert metal or combustible objects or pour water or other liquids inside the burner. . Turn off the power when connecting equipment. . Remove the plug when the burner will not be used for a prolonged time or prior to cleaning (electricity flows through the equipment even when the power is off). . Do not block the ventilation holes of the burner. . Do not use where there is condensation. Suddenly carrying the burner from a cold location to a hot location may result in the formation of drops, which may cause a malfunction or failure. . Do not cause the burner to vibrate when discs are in. Safety Precautions for Accessories . When using the AC adapter, the power cord, and the USB cable, be sure to observe the following precautions. Failing to do so may result in electric shock, fire, injury, or malfunction. • Do not insert or remove the plug when your hands are wet. • Fully insert the plug into the outlet. • Keep dust and metal objects away from the plug. • Do not damage the cord. • Place the cord where it will not trip someone up. • Do not use when thunder can be heard. • Do not dismantle. • Do not use for any product other than this one. . Do not play the provided CD-ROM with an audio player. Doing so may damage the circuits or speakers. Safety Precautions for Discs Do not use the following discs. . Cracked discs . Deeply scratched discs Installation Do not install in any of the following locations. . Humid location . Location of 60 °C or above . Location subject to direct sunlight . Location where overheating is likely . Dusty or smoky locations . Locations subject to oily smoke or steam such as a kitchen counter or beside a humidifier . Unstable location . Bathroom . Dusty places . Slanted location ATTENTION: On placing the unit: Some TVs or other appliances generate strong magnetic fields. Do not place such appliances on top of the unit as it may cause picture disturbance. When moving the product: Press C/Bto turn off the power, and wait at least 30 seconds before unplugging the power cord. Then, wait at least 2 minutes before moving the product. Cleaning Procedure IMPORTANT: . Be sure to unplug the burner before beginning cleaning. . Do not use liquid or aerosol cleaners. . Ensure that no moisture or liquid comes into contact with the drive during cleaning. Exterior of the Burner: Wipe dirt off with a dry cloth. Disc Tray: Wipe off dirt with a soft dry cloth. Disc: Gently wipe from the inner edge to the outer edge with a soft cloth. Storage: Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car! Region Codes Region codes are numbers for restricting DVD video playback. The world is separated into six regions and each region is identified by a number. If the number for a disc does not match the number for the player, the disc cannot be played on the player. (The initial region code is indicated on the label on the bottom of the burner.) Changing the region codes You can change the region code to play a DVD that has a different code. (The code cannot be changed for some playback software.) When you insert the disc, the Caution screen appears. Follow the on-screen instructions to change the code. The region code for the burner can be changed 4 times only. The code set the fourth time becomes the final code, so be sure to set a frequently used code. Take sufficient care when changing the code. Disclaimer JVC accepts no liability whatsoever for loss of data resulting from inappropriate connections or handling. EN 3 Accessories Accessories AC Adapter (AP-V400U*) Power Cord USB Cable CD-ROM Blank Disc Stand (DVD-R) CAUTION: Do not use AC adapter, power cord and USB cable other than those provided with this burner. Doing so may result in electric shock or fire. NOTE: * 043-124000-I2 (AC Adapter) is also available for customer using CU-VD20AC/AG/AS. Guide to Parts and Controls Front Rear A BCD EF APower Button (C/B) EDC Connector...