valutazioni - 2, GPA: 5
(
)
)
|
Facilità d'uso
22 23 Pllayiing a Tape 1. Press VCR to control the VCR deck. 2. Insert a pre-recorded video cassette. • If the unit is powered off, it will power on automatically when the tape is loaded. • If the Timer indicator lights on the front panel display window, press STANDBY/ON once. 3. Press PLAY (N) to start playback. • If a tape without a safety tab is inserted the unit starts playback automatically. 4. Press STOP (x) to stop playback. • If the tape reaches the end before you press STOP (x) the Recorder automatically stops, rewinds and ejects the tape. Note: S-VHS Quasi Playback (SQPB) • This Recorder can play back S-VHS recorded tapes, however, it cannot make recordings using S-VHS format tapes. • SQPB is an abbreviation for S-VHS Quasi Playback. Pllayiing a DVD 1. Press DVD to control the DVD deck. 2. Press EJECT, OPEN/CLOSE (Z) to open the disc tray. Load your chosen disc in the tray, with the playback side down. 3. Press EJECT, OPEN/CLOSE (Z) to close the tray. Playback starts automatically. If playback does not start, press PLAY (N) or Starts playback using HOME menu. 4. To stop the playback, press STOP (x). The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point. 5. Press EJECT, OPEN/CLOSE (Z) to remove the disc. Press EJECT, OPEN/CLOSE (Z) to close disc tray or press STANDBY/ON (1/&), the disc tray closes automatically and unit turns off. Playback Remote Control Function Remote Control A/B/C/D Code Switching The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (A, B, C or D). The remote control is preset to send C code signals because your unit is initially set to respond to C code signals. You can easily modify your unit to respond to A, B or D code signals. 1. Press STANDBY/ON (1/&) on the unit to turn off the unit with no video tape inserted. 2. Press the number key “1” for A, “2” for B, “3” for C or “4” for D while pressing ENTER (....) down on the remote control. 3. Press N/`` on the unit for over 5 seconds while the unit is turned off. The current code appears on the display window. 4. Press STOP (x) on the remote control, the current code on the display window changes to new code and blinks for approximately 10 seconds. 5. The new code setup on unit and remote is done. Note: If you change the batteries of the Remote Control with A, B or D code, the remote control code is set to C automatically. In this case, you should reset the remote control code described above. DVD VIDEO RECORDER RM-SDR107U TV - + STANDBY/ON (1/&) Number 1-4 STOP (x) ENTER (..) B/`` PLAYBACK VCR Playback Options Buttons Operations EJECT (Z) Ejects the tape in the VCR deck. PAUSE (X) Pause playback. Press repeatedly to step forward one frame at a time. • After 5 minutes in STILL mode the Recorder stops to protect the tape and video heads. FORWARD (M) Scan forward. In Stop mode, fast forwards the tape. In Pause mode, starts slow motion playback. • After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and video heads • After 3 minutes in SLOW MOTION mode the Recorder goes back to PLAY mode to protect the tape and video heads. BACKWARD (m) Scan backward. In Stop mode, rewinds the tape. • After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and video heads. CLEAR Resets the current tape counter position to 0:00:00. To automatically goto tape counter position 0:00:00, press RETURN while the tape is in Stop mode or in Play mode. TRACKING (+/-) Manually reduces noise on the screen during tape playback. Tracking is set automatically when a tape is inserted. AUDIO Sets tape audio to HIFI, LEFT, RIGHT or NORMAL. Use b/B buttons to select tape audio you want. 24 25 PLAYBACK DVD or Video CD Playback Features Buttons Operations OPEN / CLOSE (Z) Opens or closes the disc tray. PAUSE (X) Pause playback. Press repeatedly to play Frame-by-Frame. You can also use b/ Bto step backward and forward while in Pause mode. BACKWARD (m) / FORWARD (M) During playback, press repeatedly to select the required scan speed. - DVD; 5 steps, - Video CD, DivX, Audio CD; 3 steps In Pause mode, press BACKWARD (m) / FORWARD (M) for slow motion playback. - DVD; 4 steps, - Video CD; 3 steps • This function is forward only for Video CD. SKIP (./ >) Press SKIP (>or .) briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press SKIP (.) twice in quick successions to step back to the previous chapter/track. • To go directly to any chapter/track during playback, press DISPLAY twice and use v/ Vto select the chapter or track (for Video CD) icon. Input the chapter/track number or use b/ B. • On a Video CD with PBC, you must set PBC to [OFF] in the Setup menu to use ...
Questo manuale è adatto anche per i modelli :DVD-Player - DR-MV78BU (3.17 mb)