valutazioni - 6, GPA: 3.8
(
)
)
|
Facilità d'uso
Numbers are allotted to these sections. These numbers are called “title numbers” and “chapter numbers”. For example: • Tracks (video and music CDs) Video and music CDs are divided into sections called “tracks”. Numbers are allotted to these sections. These numbers are called “track numbers”. Title 1 Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 Title 2 For example: 2 The following types of discs cannot be played on the DVD-1000: • DVDs with region numbers other than “1” or “ALL” • DVD audio discs • DVD + RW • CVD • SV CD • DVD-ROMs • DVD-R/DVD-RAMs • CD-ROMs • CD-RW • VSDs • CDVs (Only the audio part can be played.) • CD-Gs (Only the audio is output.) • Photo CDs (NEVER play such discs on the DVD-1000.) . If you attempt to play photo CDs, the data on the disc may be damaged. • Playback control (video CDs) Video CDs including the words “playback control” on the disc or jacket are equipped with a function for displaying menus on the TV screen for selecting the desired position, displaying information, etc., in dialog fashion. In this manual, playing video CDs using such menus is referred to “menu playback”. Video CDs with playback control can be used on the DVD1000. NOTE: • This DVD video player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD video player, this DVD video player cannot play this disc. The Region number for this DVD video player is 1. 1 Track 1 Track 2 Track 3 Track 4 Track 5 7 ENGLISH 3 CAUTIONS ON HANDLING DISCS Discs Cautions on Handling Discs Only the discs including the marks shown on page 7 can be played on the DVD-1000. Note, however, that discs with special shapes (heart-shaped discs, hexagonal discs, etc.) cannot be played on the DVD-1000. Do not attempt to play such discs, as they may damage the player. Holding Discs Avoid touching the surface of discs when loading and unloading them. Cleaning Discs Be careful not to get fingerprints on the signal surface (the side which shines in rainbow colors). 2 Fingerprints or dirt on the disc may lower sound and picture quality or cause breaks in playback. Wipe off fingerprints or dirt. 2 Use a commercially available disc cleaning set or a soft cloth to wipe off fingerprints or dirt. Wipe gently from the middle Do not wipe with a circular outwards. motion. NOTE: • Do not use record spray or antistatic. Also do not use volatile chemicals such as benzene or thinner. Record Thinner Benzene spray • Do not get fingerprints, grease or dirt on discs. • Be especially careful not to scratch discs when removing them from their cases. • Do not bend discs. • Do not heat discs. • Do not enlarge the center hole. • Do not write on the labeled (printed) side with a ball-point pen or a pencil. • Water droplets may form on the surface if the disc is moved suddenly from a cold place to a warm one. Do not use a hairdryer, etc., to dry the disc. Cautions on Storing Discs • Always eject discs after playing them. • Keep discs in their cases to protect them from dust, scratches and warping. • Do not put discs in the following places: 1. Places exposed to direct sunlight for long periods of time 2. Humid or dusty places 3. Places exposed to heat from heaters, etc. Cautions on Loading Discs • Only load one disc at a time. Loading one disc on top of another may result in damage or scratch the discs. • Load 8 cm discs securely in the disc guide, without using an adapter. If the disc is not properly loaded, it may slip out of the guide and block the disc tray. • Be careful not to let your fingers get caught when the disc tray is closing. • Do not place anything but discs in the disc tray. • Do not load cracked or warped discs or discs that have been fixed with adhesive, etc. • Do not use discs on which the adhesive part of cellophane tape or glue used to attach the label is exposed, or discs with traces of tape or labels that have been peeled off. Such discs may get stuck inside the player, resulting in damage. 8 ENGLISH 4 CONNECTIONS NOTES: • Read the manuals of all the components when making connections. • Keep the power cord unplugged until all connections have been completed. • If the power is on when connections are made, noise may be generated and damage the speakers. • Be sure to connect the left and right channels properly, L (left) to L, R (right) to R. • Plug the power cord securely into the power outlet. Incomplete connection may result in noise. • Binding the power cord together with connection cords may result in humming or noise. (1) Connecting to an AV TV • Use the included audio video cord to connect the TV’s video input connectors and audio input connectors to the DVD-1000’s video output connectors and audio output connectors. To power outlet DVD-1000 YCBCR COMPONENT VIDEO OUT R L AUDIO OUT VIDEO OUT S-VIDEO OUT DIGITAL OUT (PCM/BITSTREAM) OPTICALCOAXIAL VIDEO IN S-VIDEO IN AUDIO IN L R TV S-Vid...