Since 1876, H.B. Ives quality bardivarc bas helped build the most distinguished homes in America, BAR WINDOW LIFT FOR USE ON DOUBLE HUNG WINDOWS FOR EASY OPENING MAY ALSO BE USED AS DRAWER, DOOR, AND CABINET PULL OR AS UTILITY HANDLE INSTALLATION INSTRUCTIONS TOOLS REQUIRED: Phillips screwdriver, pencil and awl. FOR WINDOW APPLICATION -1. Position pull on center of rail of lower window. Mark and secure. (If 2 used, space equally). FOR PULL APPLICATION -1. Place in desired vertical position

Our commitment to quality makes r\'ES a name you can trust. SUPER-MITE® MAGNETIC CATCH DUAL TRIPLE POLE FOR USE ON LARGE CABINET AND FULL LENGTH DOORS. FEATURES HEAVY DUTY DESIGN WITH EXTRA STRENGTH HOLDING POWER. INSTALLATION INSTRUCTIONS TOOLS REQUIRED: Drill, Vis" drill bit, Phillips screwdriver, awl or pencil. FOR SINGLE DOOR APPLICATION (Illustration 1): 1. Po'sition case (A) on top corner or side of door frame. 2. Mark, drill pilot holes in center of elongated holes (B) and secur

Our commitment to quality makes IVES a name you can trust. FLOOR DOOR STOP FOR USE ON DOORS (UNDERCUT APPROXIMATELY vn TO STOP DOOR AND PREVENT DAMAGE TO mLL, DOOR AND DOOR KNOB. „ ^ Note: Check INSTALLATION S^telX? INSTRUCTIONS installing. TOOLS REQUIRED: Drill, W and Vi»' drill bits, Phillips screwdriver, hammer, and or pencil. L Open door into desired stop position. 2. Slide template under door and tape to floor 3. Mark hole centers. 4. Drill stud hole approximately 1" deep with W or

Since 1876, HJB. ives quality hardware has helped build the most distinguished homes in America, USE TEMPLATE BELOW FOR EASY INSTALLATION OF DOOR KNOCKER. APARTMENT DOOR KNOCKER WITH VIEWER FOR USE ON EXTERIOR OR INTERIOR DOORS OF HOMES, CONDOMINIUMS, APARTMENTS AND OFFICES 02-31221-605 (BRIGHT) 02-31221-609 (ANTIQUE) 02-31221-612 (BRONZE) 02-31221-613 (DK. BRONZE) 02-31221-626 (CHROME) 02-31241-605 (BRIGHT) 02-31241-609 (ANTIQUE) 02-31241-612 (BRONZED 02-31241-613 (DK BRONZE) 02-31241-626

Our commitment to quality makes IVES a name you can trust. SCREEN DOOR PULL FOR USE ON WOOD SCREEN DOORS. MAY ALSO BE USED AS A PULL OR HANDLE ON DRAWERS AND CABINETS. INSTALLATION INSTRUCTIONS TOOLS REQUIRED: Phillips screwdriver, awl or pencil. FOR DOOR APPLICATION (Illustration 1): 1. Position in desired location and mark. 2. Secure with screws provided. FOR DRAWER APPLICATION (Illustration 2): 1. Position in desired location and mark. 2. Secure with screws provided. ASK FOR OTHER

EFFECTIVELY HOLDS DOOR OPEN IN ANY POSITION. RUGGED CONSTRUCTION FEATURES RESILIENT NON-MARRING TIP. INSTALLATION INSTRUCTIONS TOOLS REQUIRED: Phillips screwdriver, pencil and awl 1. Position door holder near edge of door, with top screw hole 4 Vs" above floor. (See illustration.) 2. Mark and secure. MAINTENANCE INSTRUCTIONS H.B. Ives Solid Brass products have a clear, protective lacquer coating which helps prevent discoloration Do not use abrasive waxes or cleaners. ASK FOR OTHER FINE DE

DOORS TOOLS REQUIRED: Drill. 3/32" bil. Phillips screwdriver, chisel, hummer, awl. pencil. 1-1/4" spade bil or 1-1/4" router. New Installation: 1. Position lop of hinge approximately 5" from top of door and bottom hinge approximately 10" from floor. Position the third hinge equally between the top and hottoni hinges. 2. The hinge barrels should extend out from door enough to clear door casing. See illustration. 3. Trace hinge outline and mortise door to fit thickness of hinge leaf. The insi

Our commitment to quality makes IVES a name you can trust. LEFT HANDED CASEMENT OPERATOR FOR USE ON STANDARD WOOD CASEMENT WINDOWS 14" TO 20’ WIDE AS REPLACEMENT FOR OPERATOR. FEATURES EASY INSTALLATION, SMOOTH OPERATION AND RUGGED CONSTRUCTION. INSTALLATION INSTRUCTIONS TOOLS REQUIRED: Phillips screwdriver, owl or pencil. 1. Detach present operator base (A) from sill and pull metal extending rod (B) out of window track (C). 2. Position new operator in same location, connect metal ext

Determine pivot location using dimensions on reverse side. The pivots are non-handed. To determine hand of door and proper pivot position, see diagrams above. 2. Locate, drill, and tap 1/4-20 mounting holes for metal door or metal frame. Locate and drill pilot holes for #14 wood screws for wood door or wood frame. Install pivot leafs with 1/4-20 x 3/4” FHMS or #14 FHWS screws provided. 3. Loosen set screw in pin leaf with 3/32” Allen wrench provided and remove pivot pin. 4. Use 5/32” Allen wr

Since 1876, H.B. Ives quality hardware has betped build the most distinguished homes In America. DUTCH DOOR QUADRANT FOR USE ON DUTCH DOORS. Provides easy, positive latching of doors. Holds its position — Heavy spring washer provides constant tension. NON-HANDED Quadrant may be installed on either left or right lvnd opening doors. INSTALLATION INSTRUCTIONS TOOLS REQUIRED Drill, 1/8” drill bit for pilot holes, Phillips screwdriver and pencil. 1. Position Quadrant (as shown in illustration) a