valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
1 - 1 2 Connections 2.1 Connection cables ...................................................................... 2 - 1 2.2 Connections ................................................................................ 2 - 3 Connecting the fax machine to the PC ......................................... 2 -3 Connection to a LAN network using a PC .................................... 2 - 4 Connection the fax machine directly to a LAN network................. 2 -5 3 Installing the software 3.1 Installation with Windows 95 .................................................... 3 - 1 3.2 Installation with Windows 98 .................................................... 3 - 5 3.3 Installation with Windows NT 4.0 ............................................. 3 - 9 3.4 Installation with Windows 2000 .............................................. 3 - 13 4 Setting up the printer 4.1 Changing the settings using the software................................4 - 1 Launching the printer driver ......................................................... 4 - 1 4.2 Changing settings directly at the printer .................................. 4 - 3 Symbols ........................................................................................4 - 3 Overview symbols ......................................................................... 4 - 4 Fonts .............................................................................................4 - 5 Overview fonts .............................................................................. 4 - 6 Line number ................................................................................. 4 - 7 Test page ...................................................................................... 4 - 7 5 Troubleshooting 6 Appendix 6.1 Specifications .............................................................................. 6 - 1 Non printing area........................................................................... 6 - 1 PCL5e IVZ-1 IVZ-2 PCL5e Introduction 1 Introduction 1.1 System requirements Microsoft Windows ® 95 Microsoft Windows ® 98 Microsoft Windows ® NT4.0 Microsoft Windows ® 2000 WARNING Radio interference due to non-shielded cables Interface cables that are not shielded, may cause radio interference and damage to other devices. . Only use shielded cables. Brand names Microsoft® is a registered trade mark of the Microsoft Corporation. Windows® is a registered trade mark of the Microsoft Corporation. PCL5e 1-1 Introduction 1-2 PCL5e Connections 2 PCL5e 2-1 2 Connections 2.1 Connection cables . Preparation Turn the PC and the Minoltafax 2800/3800 off, before you connect the cables. When switching the machines back on, make sure to turn the Minoltafax on before you turn the PC on. . Auto detection If the automatic detection for components is on, Windows will automatically start setting up the new printer. Interrupt this procedure before you begin with the installation. Use a parallel IEEE1284 type B interface cable to connect the printer to the PC, the cable must have the following pin connections: Pin no. Pin no. 1 - Store 19 GND 2 Data 1 (LSB) 20 GND 3 Data 2 21 GND 4 Data 3 22 GND 5 Data 4 23 GND 6 Data 5 24 GND 7 Data 6 25 GND 8 Data 7 26 GND Connections Pin no. Pin no. 9 Data 8 (MSB) 27 GND 10 -Ack 28 GND 11 Busy 29 GND 12 PError 30 GND 13 Select 31 -Init 14 -AutoFd 32 -Fault 15 N.C. 33 N.C. 16 GND 34 N.C. 17 Chassis 35 N.C. 18 VCC 36 -Select 2-2 PCL5e Connections 2 PCL5e 2-3 2.2 Connections You may use the fax machine with a PC or in a network. Connecting the fax machine to the PC 1 Place the ferrite core (Kitagawa SFC8) on the cable and close the core. Place the ferrite core directly behind the jack to the fax machine. 2 Connect fax machine and PC according to the scheme below. . Note The interface cable should not exceed 2 meters in length. Also the cable must be shielded. 2 Connections 2-4 PCL5e Connection to a LAN network using a PC . LAN conncetion The Minoltafax can be fitted with one LAN board only (e-mail or network printer card). If the machine is fitted with a printer board, connect it directly to the LAN network. If the machine is fitted with an e-mail board, connect it to the LAN network using a PC. . Connect fax machine and PC according to the scheme below. In this case the PC will serve as a print server and connect the fax machine to the network. Use the parallel interface for connection. . Note The interface cable should not exceed 2 meters in length. Also the cable must be shielded. Connections 2 PCL5e 2-5 Connection the fax machine directly to a LAN network . Use CAT 5 cables to connect the fax machine directly to the LAN network. For this connection the fax machine must be fitted with a network borad. In this case the board will serve as a print server. Connections 2-6 PCL5e Installing the software 3 Installing the software 3.1 Installation with Windows 95 . Preparation Turn the PC and the Minoltafax 2800/3800 off, before you connect the cables. When sw...
Questo manuale è adatto anche per i modelli :Fax - MINOLTAFAX 3800 (2.16 mb)