valutazioni - 2, GPA: 4.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
The USB driver is contained in the supplied CD-ROM (SPVD-006). If the drive is not recognized, see “Troubleshooting” on page 93. E.g., for Windows Me users 1 Turn on your computer and allow Windows to load. Do not connect the USB cable in this step. 2 Insert the supplied CD-ROM (SPVD-006) in the CD-ROM drive of your computer If the setup screen of DirectCD appears, click [Exit] on the screen. 3 Open [ My Computer] on Windows and right-click the CD-ROM drive (Example: CD-ROM (D:)), then select [Open (O)]. The file list of the CD-ROM appears. If other application software works, quit the application software. 4 Double-click the [SONY USB] folder in the file list, and then double- click [ SET UP]. The installer of device driver starts and the necessary files are automatically copied to the computer. 5 Restart the computer. If the message appears after the installation to verify that you restart the computer, restart the computer. In other cases, restart it manually. 6 Prepare the camera before connecting the computer. • Connect the AC power adaptor to the camera. • Turn on the camera. 7 Connect the USB jack on your camera with the USB connector on your computer using the supplied USB cable. to the USB connector USB cable to the USB jack Push the connector as computer far as it will go 8 The computer automatically recognizes the camera. Open [ My Computer], the newly recognized drive (Example: (E:)) is added. Installing driver is complete. 9 Insert the disc into the camera, connect the AC power adaptor to the camera, then turn on the power of the camera. Go to “Viewing images” below. If you remove the disc without viewing an image, be sure to read “Before disconnecting the USB cable” on page 40. Viewing images When you view images on the disc which was not finalized, you have to install DirectCD included in the supplied CD-ROM. For details on DirectCD, refer to the software operating instructions of DirectCD. E.g., for Windows Me users 1 Turn on your computer and allow Windows to load. 2 Connect the USB jack on your camera with the USB connector on your computer using the supplied USB cable. to the USB connector USB cable to the USB jack Push the connector as far computer as it will go B BBBB Playback 3 Insert the disc into the camera, connect the AC power adaptor to the camera, then turn on the power of the camera. “USB MODE” appears on the LCD screen of the camera. 39 4 Open [ My Computer] on Windows and double-click the newly recognized drive. (Example: [ CD Mavica (E:)]) The folders inside the disc are displayed, and the disc cover of the camera will be locked. To remove the disc, carry out the operation for removing the disc described on the software operating instructions of DirectCD. If the drive is not recognized, see “Troubleshooting” on page 93. 5 Select and double-click the desired image/sound file from the folder. For the detailed folder and file names, see “Image file storage destinations and image file names” (page 43). Desired file type Double-click in this order Still image “DCIM” folder t “100MSDCF” folder t Image file Moving image* “MSSONY” folder t “MOML0001” folder t Image file Audio* “MSSONY” folder t “MOMLV100” folder t Audio file Clip Motion image “DCIM” folder t “100MSDCF” folder t Image file E-mail image Tiff image (uncompressed) “MSSONY” folder t “IMCIF100” folder t Image file . Copying a file to the hard disk of your computer before viewing is recommended. If you play back the file directly from the disc, the image and sound may break off. Before you remove the disc, be sure to read “Before disconnecting the USB cable” on page 40. Copying a file in the disc to a computer Select the desired file, and drag it to the desired drive or folder. Copying a file in a computer to a disc Once you install DirectCD included in the supplied CD-ROM into your computer, you can drag and drop the desired file to the disc. To view the image using this camera, the file name format must be as follows, “DSC0ssss.JPG”. For details, see “Image file storage destinations and image file names” (page 43). Before disconnecting the USB cable Before disconnecting the USB cable, you must carry out the operation for removing the disc. This operation is described in “Removing the disc” of the software operating instructions of DirectCD. The data in the disc may be broken if you do not carry out this operation. Refer to the procedure below. 1 Remove the disc. For details, refer to the software operating instructions of DirectCD. 2 When using Windows Me, Windows 2000 Professional: 1 Select the applicable drive from [ ] on the task bar, then stop it. 2 After the message informing you that the drive has been removed safely appears, disconnect the USB cable. When using other operating systems than above: Simply, disconnect the USB cable. C Viewing images using a CD-R/CD-RW drive You do not need to finalize the disc. You have to install DirectCD included in the supplied CD-ROM. For details on DirectCD, refer to the software...
Questo manuale è adatto anche per i modelli :Telecamere - MVC-CD300 (3.15 mb)