valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
If it is flashing fast, remove the battery pack and reattach the same battery pack securely, or disconnect and reconnect the USB cable. If the charge lamp flashes fast again, it suggests that there is something wrong with the battery pack, AC Adaptor (supplied), or USB cable. Slow flashing indicates that charging is suspended because the ambient temperature is outside the suitable range for charging the battery pack. Charging will resume and the charge lamp will be lit when the ambient temperature returns to within the suitable temperature. Charge the battery pack under the suitable temperatures between 10 °C and 30 °C (50 °F and 86 °F). The battery has not been charged even if the charge lamp has turned off. • This phenomenon occurs when you use the camera in an extremely hot or cold location. Charge the battery pack under the suitable temperatures between 10 °C and 30 °C (50 °F and 86 °F). The battery pack is not charged. • When the battery pack is not charged (the charge lamp does not light) even if you follow the proper charging procedure, remove the battery pack and reinsert the same battery pack securely, or disconnect and reconnect the USB cable. Shooting images Nothing is displayed on the LCD screen when the power is turned on. • If you do not operate the camera for given period of time, the camera turns to power saving mode. To cancel the power save, operate the camera, such as pressing the shutter button halfway down. GB The shutter does not release. The shutter does not release. You are using a memory card with a write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position. • Check the free capacity of the memory card. • You cannot record images while charging the flash. • The lens is not attached properly. Attach the lens properly (page 19). Recording takes a long time. • The noise reduction function is turned on. This is not a malfunction. • You are shooting in the RAW mode. Since the RAW data file is large, the RAW mode shooting may take time. • The Auto HDR is processing an image. The image is out of focus. • The subject is too close. Check the minimum focal distance of the lens. • You are shooting in manual focus mode. Set [AF/MF Select] to [Autofocus]. • Ambient light is insufficient. • The subject may require special focusing. Use the [Flexible Spot] or manual focus function. The flash does not work. • Press the (flash pop-up) button to pop up the flash (page 43). • You cannot use a flash with the following shooting mode: – [Bracket: Cont.] – [Sweep Panorama] – [3D Sweep Panorama] – [Night Scene] and [Hand-held Twilight] in [Scene Selection] – [Anti Motion Blur] – Movie recording Fuzzy white circular spots appear on images shot using the flash. • Particles (dust, pollen, etc.) in the air reflected the flash light and appeared on the image. This is not a malfunction. The flash takes too long to recharge. • The flash has been fired in succession in a short period. When the flash has been fired in succession, the recharging process may take longer than usual to avoid overheating of the flash. Others GB The image taken with the flash is too dark. The image taken with the flash is too dark. If the subject is beyond the flash range (the distance that the flash can reach), the pictures will be dark because the flash light does not reach the subject. If the ISO is changed, the flash range also changes with it (page 44). The date and time are recorded incorrectly. • Set the correct date and time (page 23). • The area selected with [Area Setting] is different from the actual area. Set the actual area by selecting MENU t [Setup] t [Area Setting]. The aperture value and/or shutter speed flashes. • Since the subject is too bright or too dark, it is beyond the available range of the camera. Adjust the setting again. The image is whitish (Flare). Blurring of light appears on the image (Ghosting). • The picture was taken under a strong light source, and excessive light has entered the lens. When using the zoom lens, attach a lens hood. The corners of the picture are too dark. • If any filter or hood is used, take it off and try shooting again. Depending on the thickness of the filter and improper attachment of the hood, the filter or the hood may partially appear on the image. The optical properties of some lenses may cause the periphery of the image to appear too dark (insufficient light). You may compensate for this phenomenon with [Lens Comp.: Shading]. The eyes of the subject come out red. • Activate the Red Eye Reduction function. • Get close to the subject, and shoot the subject within the flash range (page 44) using the flash. Dots appear and remain on the LCD screen. • This is not a malfunction. These dots are not recorded (page 82). The image is blurred. • The picture was taken in a dark location without the flash, resulting in camera shake. The use of a tripod or the flash is recommended (page 43). [Hand-held Twilight] in [Scene Selection] (page 40) ...
Questo manuale è adatto anche per i modelli :Telecamere - NEX-F3D (7.84 mb)
Telecamere - NEX-F3K (7.84 mb)
Telecamere - NEX-F3Y (7.84 mb)