valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
WB-BKT: You turn the <4> switch to <2>, replace the battery, or replace the CF card. 0: 0, -, +/Enable 1: 0, -, +/Disable (Auto cancel works only if the flash is ready.) The first bracketed shot is the standard exposure (or exposed with the standard white balance). This bracketing sequence can be repeated. 2: -, 0, +/Enable Starts the bracketing sequence with the minus (or bluish or magenta bias) setting. 3: -, 0, +/Disable (Auto cancel works only if the flash is ready.) Repeats the bracketing sequence starting with the minus (or bluish or magenta bias) setting. This bracketing sequence can be repeated. AEB WB bracketing B/A Bias M/G Bias 0 : Standard exposure 0 : Standard white balance 0 : Standard white balance - : Decreased exposure - : More blue - : More magenta + : Increased exposure + : More amber + : More green C.Fn-10 Superimposed display 0: On 1: Off The AF point in the viewfinder will not flash in red. Recommended when it is bothersome to see it light up. The AF point will still light when you select it. 171 3 Custom Function SettingsN C.Fn-11 Menu button display position When you press the button and use <9> to select the AF point. 1: Multi-controller direct Without pressing the button first, you can just use the <9> to select the desired AF point. Pressing the button will set it to automatic AF point selection. 2: Quick Control Dial direct Without pressing the button first, you can just use the <5> dial to select an AF point directly. By holding down the button and turning the <6> dial, you can set the exposure compensation. 3 Custom Function SettingsN C.Fn-14 E TTL II 0: Evaluative Fully automatic flash photography for all conditions, from low light to daylight fill-flash. 1: Average The flash is averaged for the entire area covered by the flash. Since automatic flash exposure compensation will not be executed, you may have to set it yourself depending on the scene. This also applies if you use FE lock. C.Fn-15 Shutter curtain sync. 0: 1st-curtain sync. 1: 2nd-curtain sync. When a slow shutter speed is set, you can capture a light trail following the subject. The built-in flash or external Speedlite fires the flash right before the shutter closes. This Custom Function can be used to obtain 2nd-curtain sync effects even with EX- series Speedlites which do not have this feature. If the EX-series Speedlite has this feature, it will override this Custom Function. When 2nd-curtain sync is used, a preflash will be fired for flash metering control right after you press the shutter button completely. Remember that the main flash will fire right before the shutter closes. C.Fn-16 Safety shift in AV or TV 0: Disable 1: Enable This works in the shutter-priority AE (Tv) and aperture-priority AE (Av) modes. If the subject’s brightness changes suddenly and the current shutter speed or aperture becomes unsuitable, the shutter speed or aperture is shifted automatically to obtain a suitable exposure. C.Fn-17 Magnified view 0: Image playback only Magnified view is possible while the image is displayed after you press the playback button. (p.117) 1: Image review and playback To magnify the image during the image review, hold down the