valutazioni - 4, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
(the thread diameter is 58 mm). It is not possible to attach a lens hood or filter to the wide converter or tele-converter. ..Close-up lens 250D (58mm) This lens makes taking macro shots easy. In the normal mode, close-up shots can be taken when the distance from the front of the lens to the subject is 18 to 25cm (7.1 to 9.8 in.) at maximum telephoto. Shooting area (during macro mode) Distance from the front of the lens to the subject Shooting area Telephoto end 18 cm (7.1 in.) 36 X 27 mm (1.4 X 1.1 in.) ..Conversion Lens Adapter LA-DC58G This is a lens adapter required for attaching the wide converter, tele-converter and close-up lens. It can be separated into front and rear sections. ..To attach the Wide Converter WC-DC58N, or Tele-converter TCDC58N. Detach the front section of the conversion lens adapter, and attach only the rear section to the camera. ..To attach the Close-up lens 250D Attach the conversion lens adapter to the camera with the front and rear sections combined. Front section Rear section Attach Detach Appendix 111 Attaching a Lens 1 Be sure that the camera is turned off. 3 When the 2 Press the ring release button and hold it down, and turn the ring in the direction of the arrow. Ring Release Button Ring mark on the camera and the mark on the ring are aligned, lift off the ring. 4 Detach the front section of the conversion lens adapter (p. 111). • When using the close-up lens, attach the conversion lens adapter to the camera with the front and rear sections combined. 5 Align the .. mark on the conversion lens adapter with the mark on the camera, and turn the adapter in the direction of the arrows as far as the .. mark on the camera. • To remove the conversion lens adapter, turn the adapter in the opposite direction with holding down the ring release button. 6 Set the lens on the adapter, and turn it in the indicated direction to attach it securely. ..Completely remove all dust and dirt from conversion lenses with a lens blower brush before use. The camera may focus on any dirt that remains. ..Be careful when handling the lenses since it is easy to get finger prints on them. ..Be careful not to drop the camera or adapter when removing the ring. ..When using these lens attachments, you should not shoot images in mode. It will not be possible to use the PhotoStitch software from your computer to accurately stitch the images together. Converter Settings Settings for when shooting using [IS Mode] (p. 28) with the separately sold Wide Converter WC-DC58N, Tele-converter TCDC58N or Close-up lens 250D attached. (Rec.) Menu [Converter] [Off]*/ [WC-DC58N]/[TC-DC58N]/[250D]. 1 See Menus and Settings (p. 19) * Default setting. ..Select the attached converter. Appendix When you remove the converter from the camera, return the converter setting to [Off]. 113 Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera’s built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation. Tripod Sockets Bracket (Comes with the flash) .. The High-Power Flash will not fire in the following situations: -When shooting in mode -When Flash Sync is set to [2nd-curtain] -When Flash Adjust is set to [Manual] ..The flash charge time will lengthen as the battery charge gets weaker. Always set the power/mode switch to [OFF] when you finish using the flash. ..Be careful not to touch the flash window or sensor windows with your fingers while the flash is in use. ..The flash may fire if another flash is being used in close proximity. ..The High-Power Flash may not fire outdoors in daylight or when there are no reflective items. ..For continuous shooting, although the flash fires for the first shot, it does not fire for subsequent shots. ..Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the camera and flash resulting in damage to both. ..Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. ..To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera’s front panel. ..A tripod can be used even when the flash is attached. ..Batteries ..Charge becomes Severely Limited If the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth. The terminals may be dirty from fingerprints. ..Usage in Cold Temperatures Get a spare generic lithium battery (CR123A or DL123). You are recommended to place the spare battery in your pocket to warm it up before switching it for the battery in the flash. ..Non-Use over Extended Periods Leaving batteries in the High-Power Flash could allow the battery fluid to leak, damaging the product. Remove the batteries from the High-Power Flash an...