valutazioni - 2, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
C and D). Recharge the battery fully before using it again. Fig.A Fig.B Fig.C Fig.D Fully Charged Used Battery Battery Attach so the blue Attach in the portion of the battery opposite way pack can be seen of Fig. C. through the window. • Even charged battery packs continue to discharge naturally. You are advised to charge the battery on the day of use, or one day before, to ensure a full charge. • Since storing a fully charged battery pack for long periods of time (about 1 year) can shorten its lifecycle or affect performance, store the battery in an indoor location with low relative humidity and between the temperatures of 0 to 30 °C (32 to 86 °F). If you do not use the battery pack for long periods of time, charge it fully and discharge it fully 1. Preparing the Camera 17 in the camera at least once a year before returning it to storage. • The camera consumes the battery charge when the power is on even when a function is not being used. To conserve the battery charge, be particularly attentive in turning the camera off. • Although the battery pack's maximum operating range is 0 to 40 °C (32 to 104 °F), the optimal range is 10 to 30 °C (50 to 86 °F). At cold temperatures, such as those experienced when skiing, performance will temporarily decline, reducing the usable time before recharging. • If the usable time of a battery pack diminishes substantially even when fully charged, it should be replaced. 18 1. Preparing the Camera Battery Status Indications The following icons or messages indicate the battery status on the LCD monitor. Battery pack charge is low. Recharge it as soon as possible before it is required for an extended period. Battery charge is insufficient to operate the Change the battery camera. Replace the battery pack pack immediately. See Battery Performance (p. 156). CF Card Handling Precautions • CF cards are high-precision electronic devices. Do not bend, force, or subject them to shocks or vibration. • Do not attempt to disassemble or alter a CF card. • Moving a CF card rapidly between temperature extremes may cause condensation to form in the card, leading to potential malfunctions. To avoid condensation formation, place the CF card in a sealed plastic bag before moving it into a different temperature zone and allow it to adjust slowly to the new temperature. If condensation forms on the CF card, put it aside until the water droplets have evaporated completely. • Place the CF card in the supplied case for storage. • Do not use or store CF cards in the following types of locations. -Locations subject to dust or sand -Locations subject to high humidity and high temperatures Microdrives are a recording medium with a hard disk. Their merits are a large capacity and a low price per megabyte of capacity. However, they can be more susceptible to vibrations and shocks than CF cards, which use durable flash memories. Please be careful, therefore, not to subject the camera to vibrations or shocks when using a microdrive, especially while recording or playing back. Formatting a CF Card You should always format a new CF card or one from which you wish to erase all images and other data. Please note that formatting (initializing) a CF card erases all data, including protected images and other file types. Please check the contents of the CF card before formatting it. • If the camera does not work properly, the inserted CF card may be malfunctioning. Reformatting the CF card may solve the problem. • When a non-Canon brand CF card is malfunctioning, reformatting it may solve the problem. • CF cards formatted in another camera, computer or peripheral device may not operate correctly. When that happens, reformat the CF card with this camera. If formatting in the camera does not work properly, turn the camera off and reinsert the CF card. Then turn the camera back on and format again. • The capacity of the CF card displayed after formatting will be less than the rated capacity of the CF card. This is not a malfunction of the CF card or camera. 1. Preparing the Camera 19 aTurn the power on (p. 21). bPress the MENU button, and then the .. arrow on the omni selector. The [ (Set up)] menu appears. cSelect [Format] using the .. or • arrow on the omni selector, then press the SET button. b c aSelect [OK] using the .. or .. arrow on the omni selector, then press the SET button. The upper indicator blinks green, and formatting starts. Wait until the indicator goes off. • To cancel instead of formatting, select [Cancel] and press the SET button. bPress the MENU button. a b Indicator 20 1. Preparing the Camera Turning the Power On/Off The power/mode indicator remains lit while the power of the camera is on. The power/mode indicator indicates the state of the camera as follows. Orange:Shooting mode Green: Playback mode/Printer connection mode* Yellow: Computer connection mode* Off: The power of the camera is off. * For printer connection mode, see the Direct Print User Guide. For computer connection mode, see the S...