valutazioni - 5, GPA: 3.4
(
)
)
|
Facilità d'uso
• If the external flash has been set to stroboscopic flash, the flash’s set-up menu cannot be chosen (580EX II only). 187 Using an Eye-Fi Card Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is authorized in the country or territory of use (p. 16). When you put a prepared Eye-Fi card into the camera, you can automatically transfer your images wirelessly to a computer, or upload them to a web service. Image transfer is a function of the Eye-Fi card. For details on how to setup and use the card, and concerning problems transferring images, please refer to the Eye-Fi card user guide, or contact the manufacturer. Please keep the following things in mind when using an Eye-Fi card. • Even if you set [Eye-Fi trans.] to [Disable] (p. 189), the Eye-Fi card may transmit radio waves. Be sure to remove the Eye-Fi card from the camera before entering areas that prevent unauthorized transmission of radio waves, such as hospitals and airplanes. • If you have trouble transferring images, check the card or computer settings. For details, refer to the user guide supplied with the card. • Depending on the connection status of the wireless network, it may take time to transfer images, or image transfer may be interrupted. • Due to its transfer function, the Eye-Fi card may become hot. • Battery consumption will be quicker than in normal use. • Camera operations will be slower than in normal use. This may be resolved by setting [Eye-Fi trans.] to [Disable]. If you put an Eye-Fi card into the camera, the connection status can be checked in the shooting screen (Information Display) and playback screen (Simple Information Display). (Gray) Not connected (Flashing white) Connecting (White) Transfer standby (Animated) Transferring Interrupted Error retrieving Eye-Fi card info (Turn the camera off and on again. If this continues to appear, there may be a problem with the card.) will appear on transferred images. Using an Eye-Fi Card The power saving function does not work while transferring images (p. 53). Checking Connection Information You can check the Eye-Fi card’s access point SSID, or connection status. Choose [Connection info]. . Press the nbutton, then choose [Eye-Fi Settings] from the 3 tab, and press the m button. . Press the op buttons or turn the E dial to choose [Connection info], then press the m button. • The Connection info screen will appear. Disabling Eye-Fi Transfer You can set the card to disable Eye-Fi transfer. Choose [Disable] in [Eye-Fi trans.]. . Press the n button to choose [Eye-Fi Settings] from the 3 tab, then press the m button. . Press the op buttons or turn the E dial to choose [Eye-Fi trans.], then press the qr buttons to choose [Disable]. If the Eye-Fi card has a write-protect tab, you will not be able to check the card’s connection status, or set [Eye-Fi trans.] to [Disable] when the tab is in the locked position. What if [Eye-Fi Settings] does not appear? [Eye-Fi Settings] will only appear when an Eye-Fi card is inserted in the camera. 189 Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the power button, but nothing happened. • Confirm that the battery is the correct type, and is not depleted (p. 15). • Confirm that the battery is properly inserted (p. 16). • Confirm that the memory card/battery cover is securely closed (p. 17). • If the battery terminals are dirty, battery performance will decrease. Clean the terminals with a cotton swab and re-insert the battery several times. Battery is consumed quickly. • Battery performance decreases at low temperatures. Warm the battery, for example, by placing it in your pocket with the terminal cover on. Lens will not retract. • Do not open the memory card/battery cover while the power is on. After closing the memory card/battery cover, turn the power on then back off (p. 17). TV output Image is distorted or not showing on TV (p. 133). Shooting Cannot shoot. • When in Playback mode (p. 21), press the shutter button halfway (p. 23). The screen is off (p. 44). Screen does not display properly in dark places (p. 44). Screen does not display properly while shooting. Please note, the following will not be recorded in still images, but will be recorded in movies. • When the camera is subjected to powerful light sources, the display may darken. • When shooting under fluorescent or LED lighting, the screen may flicker. • When shooting bright light sources, a bar of light (purplish red) may appear on the screen. A flashing happears on the screen and the shot cannot be taken even though the shutter button was pressed fully (p. 26). appears when the shutter button is pressed halfway (p. 56). • Set the [IS mode] to [Continuous] (p. 171). Troubleshooting • Set the flash to h (p. 77). • Increase the ISO speed (p. 82). • Attach the camera to a tripod. Addi...