|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
To protect the battery and prolong its life, do not charge it for longer than 24 hours continuously. Charging the Battery Number of Possible Shots/Shooting and Playback Times Number of Shots*1 Approx. 380 Approx. 1 hr. 20 min. Screen On Movie Shooting Time*2 Continuous Approx. 2 hr. 30 min. Shooting*3 Number of Shots Approx. 400 Approx. 1 hr. 20 min. Viewfinder On Movie Shooting Time*2 Continuous Approx. 2 hr. 30 min. Shooting*3 Playback Time Approx. 9 hr. *1 The number of shots that can be taken is based on the Camera & Imaging Products Association (CIPA) measurement standard. *2 Times are based on default settings, starting and stopping shooting, turning the camera on and off, and operations such as using the zoom. *3 Times are based on repeatedly shooting until the maximum clip length is reached or recording stops automatically. • Under some shooting conditions, the number of possible shots and shooting time may be less than mentioned above. Battery Charge Indicator An icon or message will appear on the screen indicating the battery’s charge state. Display Summary Sufficient charge. Slightly depleted, but sufficient. (Blinking red) Nearly depleted. Charge the battery. “Change the battery pack.” Depleted. Charge the battery. What if... • What if the battery develops a bulge? This is a normal characteristic of the battery and does not indicate a problem. However, if the battery bulges to the point where it will no longer fit into the camera, please contact a Canon Customer Support Help Desk. • What if the battery is quickly depleted even after charging? The battery has reached the end of its life span. Purchase a new battery. 10 Compatible Memory Cards (Sold Separately) Using the battery and charger effectively • Charge the battery on the day, or the day before, it will be used. Charged batteries continue to discharge naturally even if they are not used. Attach the cover to a charged battery so that the .. mark is visible. • How to store the battery for long periods: Deplete and remove the battery from the camera. Attach the terminal cover and store the battery. Storing a battery for long periods of time (about a year) without depleting it may shorten its life span or affect its performance. • The battery charger can also be used when abroad. The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power. If the plug does not fit the outlet, use a commercially available plug adapter. Do not use electrical transformers for foreign travel as they will cause damage. Compatible Memory Cards (Sold Separately) The cards below can be used without restrictions on their capacities. • SD memory cards* • SDHC memory cards* • SDXC memory cards* • Eye-Fi cards * This memory card complies with SD standards. Some cards may not operate properly depending on the brand of card used. Depending on your computer’s OS version, SDXC memory cards may not be recognized even when using a commercially available card reader. Check to make sure that your OS supports SDXC memory cards beforehand. About Eye-Fi Cards This product is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of an issue with an Eye-Fi card, please check withthe card manufacturer. Also note that an approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclearwhether the card has been approved for use in the area, please check withthe card manufacturer. 11 Inserting the Battery and Memory Card Insert the included battery and a memory card (sold separately). Check the card’s write-protect tab. • If the memory card has a write-protect tab, you will not be able to record images if the tab is in the locked position. Slide the tab up until you hear a click. Open the cover. • Slide the cover ( ) and open it ( ). Insert the battery. • Insert the battery as shown until it locks into place with a click. • Be sure to insert the battery in the correct direction or it will not properly lock into place. Terminals Insert the memory card. • Insert the memory card as shown until it locks into place with a click. • Be sure the memory card is oriented correctly. Inserting the memory card in the wrong direction could damage the camera. Label Close the cover. • Close the cover ( ), and press downward as you slide it until it clicks into place ( ). What if [Memory card locked] appears on the screen? If the write-protect tab is in the locked position, [Memory card locked] will appear on the screen and you will not be able to take or erase images. Inserting the Battery and Memory Card Removing the Battery and Memory Card Remove the battery. • Open the cover and press the battery lock in the direction of the arrow. • The battery will pop up. Remove the memory card. • Push the memory card in until you hear a click, then slowly release it. • The memory card will pop up. Number of Shots per Memory Card Memory Card 4GB 16GB Number of Shots Approx. 1231 Approx. 5042 •...