valutazioni - 4, GPA: 4.8 ( )

Produttore : Canon File Size : 3.18 mb File Nome : Lingua di insegnamento:

Select the mode that best suits your subject and your surroundings. • The (*) and <§>(*) settings can be stored in the camera's memory. During shipment, the camera is set so that the flash mode is ii) when you switch the camera on. However, if you switch the camera off while the flash mode is set to <£>(i) , that setting is stored in the camera's memory and the flash mode witl begin from <§>(i) when you switch the camera back on. • You can use the CF2 custom function setting to specify that whichever flash mode is active when you switch off the camera should be stored in the camera's memory. (-> 44) Select the flash mode. • Each time you press the i button, the flash mode changes to the next setting in the cycle shown below. i<§> Flash mode button I (*) Auto Flash (-> 28) IWhen you set the flash to an automatic mode so that the flash fires automatically, the %■ icon appears when you press the shutter button halfway. <§>(£) Auto Flash with Red-eye Reduction (-> 29) I 2 V Flash ON (forced flash) (-> 31) I 3 © Flash OFF (suppressed flash) (-> 32) \ S<§>> Slow-synchro (nighttime portrait) (-> 33) @-27 ( %) Auto Flash Use this mode to take pictures of subjects other than people, or to photograph people without using the redeye reduction function. In low-light conditions, the flash fires automatically when you press the shutter button. Set the flash mode to (W. When you switch the camera on, the camera is set to (W Auto Flash mode. ^ If the flash is going to fire automatically, the I icon appears on the LCD panel when you press the shutter button down halfway. • Take the picture. Effective Flash Range (using negative color film) Film speed Wide-angle Telephoto ISO 100 0.45 to 4.1 m (1.5 to 13.5 ft.) 0.45 to 2.6 m (1.5 to 8.5 ft.) ISO 200 0.45 to 5.8 m (1.5 to 19.0 ft.) 0.45 to 3.6 m (1.5 to 11.8 ft.) ISO 400 0.45 to 8.2 m (1.5 to 26.9 ft.) 0.45 to 5.2 m (1.5 to 17.1 ft.) Ш• Pressing the flash down sets the flash mode to Flash OFF. (-» 32) •If the <§>, t, ®or §J icon is displayed on the LCD panel, press the *<$> button until none of the flash mode icons are displayed. 11-28 Changing the Flash Mode <§>(£) Auto Flash with Red-eye Reduction Use this mode to reduce the red-eye effect when you are taking pictures of people in low-light conditions. When you press the shutter button, the red-eye reduction lamp lights and then the flash fires. ISet the flash mode to <§>• • Press the i<$>button until the <§> icon appears on the LCD panel. Move to within 2 m (6.6 ft.) of your subject. • The effective range of the red-eye reduction lamp is 2 m. 3Get your subject to look at the camera. • The red-eye reduction function is only effective if the subject is looking directly at the camera. Take the picture. i • Slowly press the shutter button down fully. ■4 Shutter release is delayed for about a second while the red-eye reduction lamp lights. • Keep the shutter button pressed down until you hear the film advance to the next frame. 0-29 Red-eye Reduction Function When you use the flash to take photos of people in low-light conditions, their eyes sometimes glow red in the photograph. This is referred to as the red-eye effect and is caused by the light of the flash reflecting off the retina of the eye. In <§> and 0 modes, the red-eye reduction lamp lights for approximately 1 second before the flash fires. This causes the subject's pupils to contract and thereby minimizes the risk of red-eye. When the red-eye reduction lamp lights, shutter " operation is delayed for approximately 1 second to heighten the effectiveness of the lamp. To make the shutter operate immediately, use the ><§> button to select (» mode (-> 28) and then take the picture. ^ Important guidelines for using the red-eye reduction function 1. Because this function is not effective unless the subject is looking directly at the lamp, attract the subject’s attention so that he or she looks at the camera. 2. Take the picture from within 2 m (6.6 ft.) of your subject. 3. The effectiveness of the red-eye reduction function varies from person to person. 4. Take the picture with the lens set to the wide-angle setting. (-> 20) 5. Raise the ambient light level as much as possible. 0-30 Changing the Flash Mode m \f. Flash ON (Forced Flash) Mode In this mode, the flash fires regardless of the light conditions when the picture is taken. Use this setting for fill-in flash in daylight or to soften the outline of the subject. The image was removed due to copyright restrictions ► The image was removed due to copyright restrictions Set the flash mode to » . • Press the i<§> button until the j icon appears on the LCD panel. ■ Take the picture. 0-31 (5) Flash OFF (Suppressed Flash) Mode In this mode, the Hash does not fire regardless of how dark conditions are when the picture is taken. Use this mode for sunset shots, for places where flash use is prohibited, or for available-light photography. The image was removed ...

Scarica la tua

Per scaricare, digitare 2 cifre :