valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Using BEST SHOT 74 Creating Your Own BEST SHOT Setups Creating Your Own BEST SHOT Setups You can save up to 999 camera setups as user BEST SHOT scenes for instant recall whenever you need them. 1. On the BEST SHOT scene menu, select the scene named BEST SHOT (Register User Scene). 2. Use [4] and [6] to select the snapshot whose setup you want to save. 3. Use [8] and [2] to select “Save”, and then press [SET]. Your BEST SHOT scene will be assigned the name “Recall User Scene”, along with a scene number. NOTE • You can create BEST SHOT setup for snapshots only. You cannot create a movie BEST SHOT setup. • You can check the settings of the currently selected BEST SHOT scene by displaying the camera’s setting menus and looking at its settings. • User snapshot scenes are assigned numbers in the sequence: U1, U2, and so on. • The following are the settings that are saved for each user snapshot BEST SHOT scene. Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting, Flash Intensity, Color Filter, Sharpness, Saturation, Contrast • User BEST SHOT scenes are stored in built-in memory (page 146) in the SCENE folder (snapshots). • Formatting the camera’s built-in memory (page 157) deletes all user BEST SHOT scenes. • Use the following procedure when you want to delete a user BEST SHOT scene. 1 Display the information screen (page 74) of the user BEST SHOT scene you want to delete. 2 Press [2] ( ), select “Delete”, and then press [SET]. Using BEST SHOT 75 Shooting with High Speed Night Scene(High Speed Night Scene/High Speed Night Scene andPortrait) Shooting with High Speed Night Scene(High Speed Night Scene/High Speed Night Scene andPortrait) With High Speed Night Scene and High Speed Night Scene and Portrait, the camera detects automatically whether it is being hand-held or on a tripod. If the camera detects it is being hand-held, pressing the shutter button will record a series of images and combine them in a way that minimizes image blur due to low light conditions. If the camera detects it is on a tripod, it will shoot a single image using a longer exposure time (instead of shooting and combining multiple images), which results in an even clearer image. The flash is always disabled while “High Speed Night Scene” is selected. If the night scene image you are shooting includes people, use the “High Speed Night Scene and Portrait” BEST SHOT scene. The flash mode setting becomes > (Auto Flash) when shooting with “High Speed Night Scene and Portrait”. 1. In the REC mode, press [BS]. 2. Select “High Speed Night Scene” or “High Speed Night Scene and Portrait” and then press [SET]. 3. When you are ready to shoot, press the shutter button. • After you press the shutter button, the message “Busy... Please wait...” will appear on the monitor screen to indicate that recording is in progress. Keep the camera still while this message is displayed. The recording process takes some time to complete after the message appears. NOTE • When holding the camera by hand while shooting with these BEST SHOT scenes, make sure that the subjects remain as still as possible as the camera shoots the series of images. • The current mode dial setting is ignored when recording with this BEST SHOT scene. • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • Movement while the camera is mounted on a tripod may cause the camera to erroneously judge it is being hand held. • For handheld shooting under very dark conditions, this BEST SHOT scene may not be able to produce the exposure level required for a clear image. Use of a tripod under very dark conditions is recommended. • When shooting with these BEST SHOT scenes, the “ISO Sensitivity” setting is fixed at “AUTO”. Using BEST SHOT B 76 Shooting with High Speed Anti Shake (High Speed Anti Shake) Shooting with High Speed Anti Shake (High Speed Anti Shake) When you press the shutter button while High Speed Anti Shake is enabled, the camera records multiple images and automatically combines them in a way that produces a final image with minimal blur. You can shoot with this feature to minimize the effects of camera movement when shooting with optical anti shake does not produce the desired results. 1. In the REC mode, press [BS]. 2. Select “High Speed Anti Shake” and then press [SET]. 3. When you are ready to shoot, press the shutter button. • After you press the shutter button, the message “Busy... Please wait...” will appear on the monitor screen to indicate that recording is in progress. Keep the camera still while this message is displayed. The recording process takes some time to complete after the message appears. NOTE • The current mode dial setting is ignored when recording with this BEST SHOT scene. • With this BEST SHOT scene, the flash setting automatically becomes ? (Flash Off). • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • High Speed Anti Shake will not operate correctly while the camera is mount...