valutazioni - 3, GPA: 3.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Recording an Image Aiming the Camera Use both hands to hold the camera still when shooting an image. Holding the camera with one hand increases the chance of movement, which can blur your images. • Horizontal Hold the camera still in both hands, with your arms firmly against your sides. • Vertical When holding the camera vertically, make sure that the flash is above the lens. Hold the camera still with both hands. IMPORTANT! • Make sure your fingers or the strap does not block the flash or lens. Flash Lens NOTE • Your image will be blurred if you move the camera when pressing the shutter release button. Press the shutter release button carefully, taking care that there is no camera movement. This is especially important when available lighting is low, which slows down the shutter speed. 43 BASIC IMAGE RECORDING Recording an lmage Your camera automatically adjusts shutter speed in accordance with the brightness of the subject. Images you record are stored in the camera’s built-in memory, or to a memory card if you have one loaded in the camera. • When an optionally available SD memory card or MultiMediaCard (MMC) is loaded in the camera, images are stored on the card (page 125). 1. Press the power button to turn on the camera. • This causes an image or a message to appear on ON/OFF Power button the monitor screen. 2. Align the mode Mode selector selector with “ ” (REC). • This enters the REC mode for image recording. 3. Compose the image on the monitor screen. • You can compose images using either the monitor screen or the optical viewfinder. • When using the optical viewfinder, you can turn off the monitor screen to save power (page 25). 4. Press the shutter release button to record the image. • The number of images that can be stored in memory depends on the resolution setting you are using (pages 52, 183). • Depending on the distance or angle between the subject and the camera, the image you see in the viewfinder may not be exactly the image that is recorded. 12001200 16001600 NORMALNORMAL 03/12 / 2 4 12: 5 8 12 Shutter release button 44 BASIC IMAGE RECORDING About the REC Mode Monitor Screen • The image shown on the monitor screen in the REC mode is a simplified image for composing purposes. The actual image is recorded in accordance with the image quality setting currently selected on your camera. The image saved in file memory has much better resolution and detail than the REC mode monitor screen image. • Certain levels of subject brightness can cause the response of the REC mode monitor screen to slow down, which causes some static noise in the monitor screen image. Recording Precautions • Never open the battery cover or place the camera onto the USB cradle while the operation/flash charge lamp is flashing. Doing so not only causes the current image to be lost, it can also corrupt images already stored in file memory and even lead to malfunction of the camera. • Never remove the memory card while an image is being recorded to the memory card. • Fluorescent lighting actually flickers at a frequency that cannot be detected by the human eye. When using the camera indoors under such lighting, you may experience some brightness or color problems with recorded images. • When “Auto” is selected for the ISO sensitivity setting (page 72), the camera automatically adjusts its sensitivity in accordance with the brightness of the subject. This can cause some static noise to appear in images of relatively dark subjects. • When “Auto” is selected for the ISO sensitivity setting (page 72), the camera raises the sensitivity and uses a faster shutter speed. Because of this, you need to guard against camera movement if you have flash turned off (page 47) when recording a dimly lit subject. • If unwanted light is shining on the lens, shade the lens with your hand when recording the image. 45 BASIC IMAGE RECORDING Using Zoom You can use the digital zoom feature of your camera to zoom in on the center of an image. Performing a zoom operation toggles the zoom factor between 1X and 4X. 1. In the REC mode, press [MENU]. 2. Use [] and [] to select the “REC” tab. 3. Use [] and [] to select “Digital Zoom”, and then press []. 4. Use [] and [] to select “On”, and then press [SET]. • Selecting “Off” disables digital zoom. 5. In the REC mode, use [] and [] to change the digital zoom factor. [] : Zoom in. [] : Zoom out. Zoom out Zoom in 6. Record the image. 46 BASIC IMAGE RECORDING IMPORTANT! • Zoom is disabled whenever the monitor screen is turned off (page 25). • Using digital zoom can cause degradation of the recorded image. • To disable digital zoom, select “Off” for the “Digital Zoom” setting on the “REC” tab. NOTE • You can use the key customization feature (page 75) to configure the camera so the digital zoom factor changes whenever you press [] and [] while in the REC mode. Using the Flash Perform the following steps to select the flash mode you want to use. 1. In the REC mode, press [MENU]. 2. Use [] and [] to select the “R...