valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
However, at the same image size, pictures printed at higher resolutions will print smaller than the size indicated, and those printed at lower resolutions will print larger than the size indicated. More on Shooting 39 Changing A (Auto) Mode Settings (Shooting Menu) White Balance (Adjusting Hue) A (auto) M d (Shooting menu) MWhite balance The color of light reflected from an object varies with the color of the light source. The human brain is able to adapt to changes in the color of the light source, with the result that white objects appear white whether seen in the shade, direct sunlight, or under incandescent lighting. Digital cameras can mimic this adjustment by processing images according to the color of the light source. This is known as “white balance.” For natural colors, choose a white balance setting that matches the light source before shooting. Although the default setting, Auto, can be used under most types of lighting, the white balance setting suited to a particular light source can be specified manually to achieve more accurate results. a Auto (default setting) White balance automatically adjusted to suit lighting conditions. Best choice in most situations. b Preset manual Neutral-colored object used as reference to set white balance under unusual lighting conditions. See “Preset Manual” for more information (A41). c Daylight White balance adjusted for direct sunlight. d Incandescent Use under incandescent lighting. e Fluorescent Use under fluorescent lighting. f Cloudy Use when taking pictures under overcast skies. g Flash Use with the flash. The icon for the current setting is displayed in the monitor (A 6). However, when Auto is selected, no icon is displayed. B Notes on White Balance • There are functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 51) for more information. • At white-balance settings other than Auto or Flash, turn the flash off (W) (A 31). More on Shooting 40 Changing A(Auto) Mode Settings (Shooting Menu) Preset Manual The preset manual option is effective with mixed lighting or to compensate for light sources with a strong color cast when the desired effect has not been achieved with white balance settings like Auto and Incandescent (for example, to make pictures taken under a lamp with a red shade look as though they had been shot under white light). Follow the procedure below to measure the white balance value according to the light source when shooting. 1 Place a white or gray reference object under the lighting that will be used during shooting. 2 Display shooting menu (A37), use the multi selector to choose bPreset manual in the White balance menu and press the k button. The camera zooms in to the position for measuring white balance. More on Shooting Presetmanual IncandescentIncandescentIncandescentFluorescentFluorescentFluorescentCloudyCloudyCloudyFlashFlashWhitebalanceDaylightDaylightDaylightAutoAuto 3 Choose Measure. To apply the most recently measured value for preset manual, choose Cancel and press the k button. Presetmanual Cancel Measure 4 Frame the reference object in the measuring window. Presetmanual Cancel MeasureMeasuring window 5 Press the kbutton to measure a value for preset manual. The shutter is released and the new white-balance value is set. No picture is recorded. B Note on Preset Manual A value for flash lighting cannot be measured with Preset manual. When shooting using the flash, set White balance to Auto or Flash. Changing A (Auto) Mode Settings (Shooting Menu) Continuous A (auto) M d (Shooting menu) M Continuous Enable continuous shooting or BSS (best shot selector). U Single (default setting) One picture is taken each time the shutter-release button is pressed. V Continuous While the shutter-release button is held down, up to three pictures are taken at a rate of about 0.7 frames per second (fps) when Image mode is set to R 4320.3240. D BSS (Best Shot Selector) The “best shot selector” is recommended when shooting with the flash off or the camera zoomed in, or in other situations in which inadvertent motion can result in blurred pictures. When BSS is on, the camera takes up to ten pictures while the shutter-release button is held down. The sharpest picture in the series is automatically selected and saved. W Multi-shot 16 Each time the shutter-release button is pressed, camera takes 16 shots at a rate of about 30 fps and arranges them in a single image shots. • Image mode is fixed at L (2560 . 1920). • Digital zoom is not available. At settings other than Single, the indicator for the current setting is displayed in the monitor (A 6). More on Shooting 42 Changing A (Auto) Mode Settings (Shooting Menu) B Notes on Continuous Shooting • When Continuous, BSS, or Multi-shot 16 is selected, flash is disabled. Focus, exposure, and white balance are fixed at the values determined with the first picture in each series. • The frame rate with continuous shooting may vary depending upon th...