valutazioni - 0, GPA: 0
(
)
)
|
Foto e specifiche Olympus VH-520 |
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Press the n button to turn the camera on. . Press the q button to switch to the shooting mode. . Wait until #(flash charge) stops blinking before taking pictures. . With prolonged camera use, the internal temperature may increase, resulting in automatic shutdown. If this occurs, wait until the camera has suffi ciently cooled. The camera’s external temperature may also increase during use, however this is normal and does not indicate malfunction. 44 EN Monitor Error message “Difficult to see”. . Condensation may have occurred. Turn off . When one of the messages below is displayed on the power, and wait for the camera body the monitor, check the corrective action. to become acclimated to the surrounding temperature and dry out before taking pictures. “The light is caught in the picture”. . Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Date and time function “Date and time settings return to the default setting”. . If the batteries are removed and left out of the camera for about 1 days*1, the date and time settings return to the default setting, and must be reset. *1 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. “Turning on the camera and making the initial settings” (p. 7) Miscellaneous “The camera makes a noise when taking pictures”. . The camera may activate the lens and make a noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot. Error message Card Error Corrective action Card problem Insert a new card. Write Protect Card problem The card write-protect switch is set to the “LOCK” side. Release the switch. Memory Full Internal memory problem • Insert a card. • Erase unwanted images.*1 Card Full Card problem • Replace the card. • Erase unwanted images.*1 Card Setup Format Power Off Card problem Use FGto select [Format], and press the Abutton. Next, use FGto select [Yes], and press the Abutton.*2 Memory Setup Memory Format Power Off Power OffPower Off Internal memory problem Use FGto select [Memory Format], and press the Abutton. Next, use FGto select [Yes], and press the A button.*2 *1 Before erasing important images, download them to a computer. *2 All data will be erased. EN 45 Error message Corrective action Internal memory/Card problem No Picture Take pictures before viewing them. Problem with selected image Use photo retouch software, etc. to view the image on a Picture Error computer. If the image still cannot be viewed, the image file is corrupted. The Image Cannot Be Edited Problem with selected image Use photo retouch software, etc. to edit the image on a computer. Battery Empty Battery problem Charge the battery. Cannot Print*3 Problem with selected image Use a computer to print. *3 This camera may be unable to print images taken by other cameras. Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below. Focusing “Focusing on the subject” . Taking a picture of a subject not in the center of the monitor After focusing on an object at the same distance as the subject, compose the shot, and take the picture. Pressing the shutter button halfway (p. 9) . Set [AF Mode] (p. 28) to [Face/iESP] . Taking a picture of a shadowy subject Using the AF illuminator makes focusing easier. [AF Illuminat.] (p. 29) . Taking a picture of subjects where autofocus is difficult In the following cases, after focusing on an object (by pressing the shutter button halfway down) with high contrast at the same distance as the subject, compose the shot, and take the picture. Subjects with low contrast 46 EN When extremely bright objects appear in the center of the monitor Object with no vertical lines*1 *1 It is also effective to compose the shot by holding the camera vertically to focus, and then returning to the horizontal position to take the picture. When objects are at different distances Fast-moving object The subject is not in the center of the frame Camera shake “Taking pictures without camera shake” . Select [C Sport] in the scene mode (p. 13) The [C Sport] mode uses a fast shutter speed and can reduce the blur incurred by a moving subject. . Taking pictures at a high ISO sensitivity If a high ISO sensitivity is selected, pictures can be taken at a high shutter speed even at locations where a flash cannot be used. “ISO sensitivity” (p. 25) Exposure (brightness) “Taking pictures with the right brightness” . Taking pictures using [Face/iESP] (p. 28) Appropriate exposure is obtained for a face against backlight, and the face is brightened. . Taking pictures using [Fill In] (p. 24) flash A subject against backlight is brightened. . Taking pictures of a white beach or snow scene Select [qBeach & Snow] in the scene mode (p. 13). EN 47 . Taking pictures using exposure compensation (p. 24) Adjust the brightness while viewing the screen for ...