valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
Notice for customers in the United Kingdom A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. GB Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM Insert the CD-ROM into the CD-ROM drive. GB For Windows users: 1 Click [User Guide] t [Install]. 2 Start “User Guide” from the shortcut on the desktop. For Macintosh users: 1 Select the [User Guide] and copy [eng] folder stored in the [User Guide] folder to your computer. 2 After copying is complete, double-click “index.html” in the [eng] folder. Checking the accessories supplied • AC adaptor AC-UB10 (1) • Power cord (mains lead) (not supplied in the USA and Canada) (1) • Dedicated USB connection support cable (1) (Sony Corporation 1-838-714-) • Wrist strap (1) •CD-ROM (1) – Cyber-shot application software – “Cyber-shot User Guide” • Instruction Manual (this manual) (1) • The battery pack is built into this camera. GB 7 Identifying parts Identifying parts A ON/OFF (Power) button B Shutter button C Power/Charge lamp D Flash E Self-Timer lamp/Smile Shutter lamp F Microphone G Lens H LCD screen GB I (Playback) button J For shooting: W/T (Zoom) lever For viewing: (Playback zoom) lever/ (Index) lever K Hook for wrist strap L Speaker M Mode switch N (Delete) button O MENU button P Control button Menu on: v/V/b/B/z Menu off: DISP/ / / Q Tripod receptacle • Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur. R RESET button S Lock release lever for USB arm T (USB) arm U USB arm cover Charging the camera Charging the camera Countries/regions other than the USA and Canada Power cord Power/Charge lamp GB Lit: Charging Off: Charging finished (Mains lead) The USA and Canada Lock release lever for USB arm Dedicated USB connection support Plug cable (supplied) USB arm Dedicated USB connection support cable 1 Press the ON/OFF (Power) button to turn off the camera. 2 Slide the lock release lever for USB arm. • The USB arm cover opens as shown in the illustration, then the USB arm comes out. 3 Connect the AC adaptor to the wall outlet (wall socket). • The Power/Charge lamp lights up in orange and charging starts. • Be sure to turn off the camera. • You can charge the partially discharged battery pack. GB 9 x x Pull out the cable, and then lay the USB arm with finger. Then, the USB arm cover closes. Notes • Do not push on the USB arm forcibly. • Be careful not to pinch your finger in the USB arm. • If the USB arm cover is closed, open the USB arm cover and lay the USB arm. Do not push the USB arm when the USB arm cover is closed. • Use a nearby wall outlet (wall socket) when using the supplied AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using the camera. • When charging is finished, disconnect the dedicated USB connection support cable (supplied) from the computer, or the AC Adaptor from the wall outlet (wall socket). • Make sure to use the supplied AC adaptor or the supplied dedicated USB connection support cable for charging. • If the Power/Charge lamp does not light up even after connecting the AC adaptor to the camera and the wall outlet (wall socket), the battery pack is in charging standby condition as the ambient temperature is out of the appropriate range. Charging starts and the lamp lights up when the ambient temperature becomes appropriate for charging. Charging the battery pack in an ambient temperature of 10°C to 30°C (50°F to 86°F) is recommended. x Charging the battery pack with a computer You can charge the battery pack with the dedicated USB connection support cable. GB Power/Charge lampDedicated USB connection Power/Charge lampDedicated USB connection GB support cable 1 Press the ON/OFF (Power) button to turn off the camera. 2 Connect the camera to the computer that is turned on with the dedicated USB connection support cable (supplied). • The Power/Charge lamp lights up in orange, and charging starts. The Power/ Charge lamp turns off, charging has completed. • The Power/Charge lamp may turn off when the temperature is outside of the recommended operating temperature (10°C to 30°C (50°F to 86°F)). 3 When charging is finished, delete the USB connection between the camera and computer. Note • Be careful also of the following points: – When you connect the camera to a laptop computer that is not connected to an AC power source, the battery of the lapt...