valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
. Names of parts 1...Focusing ring 2...Distance index 3...Lens contacts 4...Mounting index 5...Distance scale 6...Focus-hold button 7...Focus-mode switch . Attaching and detaching the lens To attach the lens (See illustration .–..) 1 Remove the rear and front lens caps and the camera body cap. You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2). 2 Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. Do not press the lens release button on the camera when mounting the lens. Do not mount the lens at an angle. To remove the lens (See illustration .–..) While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. . Attaching the Lens Hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Align the red line on the lens hood with the red point on the lens, then insert the lens hood into the lens mount and rotate it clockwise until the red point on the lens hood is aligned with the red point on the lens and the lens hood clicks into place. When using a built-in camera flash, remove the lens hood to avoid blocking the flash light. If there is a red line or other mark, attach the lens hood precisely or it may be ineffective or appear in pictures. When storing, fit the lens hood onto the lens backwards. . Focusing To switch between AF (auto focus) and MF (manual focus) Focusing can be switched between AF and MF on the lens. For AF photography, both the camera and lens should be set to AF. For MF photography, either or both the camera or lens should be set to MF. To set the focus mode on the lens (See illustration .-..) Slide the focus-mode switch to the appropriate mode, AF or MF. In MF, turn the focusing ring to adjust the focus while looking through the viewfinder (See illustration .-.). The focus signal in the viewfinder indicates the current focusing state. To use a camera equipped with an AF/ MF control button Press the AF/MF control button to switch AF to MF when both the camera and lens are set to AF. . . . . . . . . . . 4-188-197-03(1) ©2010 Sony Corporation Printed in Japan ...../ Interchangeable Lens/ Objectif interchangeable/ ...../Operating Instructions/Mode d'emploi/ Manual de instrucciones/ . . . . .................... .................... ............. ............................ ........................... ............................. ..................... ...................... ..................... ............... ..................... ............ ..................... ...................... A...................... ....................... ................... ....... ......................... ................... E......................... .......................... ....E.................... .. ............ ......................... ..1m..................... ......................... ...................... ........ ......................... ......................... .1 ~ 2.............. . ...... 1….........2….... 3…........4…...... 5….....6…............ 7…............ . . Press the AF/MF control button to switch MF to AF when the camera is set to MF and the lens is set to AF. Direct manual focus (DMF) Rotate the focusing ring to set the correct DMF when the focus is locked in AF-A (automatic auto focus) or AF-S (singleshot auto focus). DMF is not available in the following cases: When the image is out of focus When AF-C (continuous auto focus) is selected When focusing of the second photo is complete in continuous recording in AF-A Shooting at infinity in MF The focusing mechanism turns slightly past infinity to provide accurate focusing under various operating temperatures. Always confirm the image sharpness through the viewfinder, especially when the lens is focused near infinity. Focus-hold button (See illustration .-..) While the focus-hold button is pressed, the auto focus function is suspended and focusing is fixed for shooting. The function of the focus-hold button can be changed on cameras with custom function capability. Refer to your camera manual for details. Specifications Name (Model name) Distagon T 24mm F2 ZA SSM (SAL24F20Z) Equivalent 35mm-format focal length*1 (mm) 36 Lens groups-elements 7-9 Angle of view 1*2 84° Angle of view 2*2 61° Minimum focus*3(m (feet)) 0.19 (0.63) Maximum magnification (.) 0.29 Minimum f-stop F22 Filter diameter (mm) 72 Dimensions (maximum diameter . height) (Approx., mm (in.)) 78.76 (3 1/8.3) Mass (Approx., g (oz)) 555 (19 5/8) *1 The equivalent 35mm-format focal length shown above is for Interchangeable Lens Digital Cameras equipped with an APS-C sized image sensor. *2 The angle of view 1 is for 35mm-format cameras, and the angle of view 2 is for Interchangeable Lens Digital Cameras equipped with an APS-C size image sensor. *3 M...