valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Fn2 Button Press the d button Mz tab (A10) M Fn2 button Choose the function to be performed when the w2 button (A4) is pressed while shooting. Option Description Off (default setting) Shoot without the function. Operation will be disabled. Virtual horizon, View/hide histograms, View/hide framing grid Select whether to view or hide the virtual horizon, histogram or framing grid displays (E71) on the monitor screen during shooting. Built-in ND filter Change the built-in ND filter (E52) setting. Reference Section E85 Noise reduction filter Flash exp. comp. Autofocus mode AF area mode Continuous Metering Custom Picture Control Noise reduction filter Flash exp. comp. Autofocus mode AF area mode Continuous Metering Custom Picture Control The Setup Menu Customize My Menu Register frequently used menu items in My Menu (maximum of 5). The registered My Menu can be displayed when the quick menu dial is set to I, allowing quick checks or changes to the settings (only when the shooting mode is set to A, B, C, D, E, F or N). The following items can be registered. Press the d button Mz tab (A10) MCustomize My Menu Single Autofocus mode AF area mode Continuous Metering Custom Picture Control Custom Picture Control (E42) Flash exp. comp. (E51) Digital zoom (E75) Metering (E43) Noise reduction filter (E52) Format memory/Format card (E79) Continuous (E44) Distortion control (E53) Built-in ND filter (E52) AF area mode (E47) Active D-Lighting (E53) Eye-Fi upload (E89) Autofocus mode (E51) Vibration reduction (E73) None (delete)* * Choose to remove an item from My Menu. Registering into My Menu 1 Use the multi selector to choose the menu item and press the k button. • The menu item selection screen is displayed. Autofocus mode AF area mode Continuous Metering Custom Picture Control Customize My Menu 2 Choose the menu item to be registered and Customize My Menu : 1 press the k button. • The chosen menu item is switched. • To finish the setting, press the multi selector J. Reference Section E86 The Setup Menu Reset File Numbering Press the d button Mz tab (A10) MReset file numbering When Yes is selected, the sequential numbering of file numbers is reset (E100). After resetting, a new folder is created and the file number for the next picture taken starts from “0001.” B Note on Reset File Numbering Reset file numbering cannot be applied when the folder number reaches 999 and there are images in the folder. Insert a new memory card, or format the internal memory/memory card (E79). GPS Options Press the d button Mz tab (A10) M GPS options Set this option when the GPS Unit (available separately) is connected. This setting is enabled when the GPS Unit (available separately) (E102) is connected to the accessory terminal (A2). Option Description Record GPS data When set to On (default setting), signals are received from the GPS satellites and positioning starts. The position information (latitude and longitude) can be recorded on the pictures to be shot (E88). • Set Time zone and date (E69) correctly before using the GPS function. Synchronize Signals from the GPS satellites are used to set the date and time of the camera's internal clock (only when Record GPS data is set to On). Check the positioning status before starting synchronize. B Notes on Synchronize • Date/time adjustment by Synchronize is set according to the time zone set in Time zone and date (A24, E69) of the setup menu. Check the time zone before setting Synchronize. • The date/time set using Synchronize is not as accurate as radio clocks. Use Time zone and date in the setup menu to set the time if it is not accurate in Synchronize. Reference Section E87 Reference Section The Setup Menu Recording GPS Data on Pictures When the GPS Unit (available separately) is connected, signals from GPS satellites are received and the current position information (latitude and longitude) can be calculated and recorded on the pictures to be shot. • Make sure to insert the plug in the correct direction. Inserting the plug in the wrong direction could damage the plug or connector. • To use the built-in flash, do not attach the GPS Unit to the accessory shoe. • To start recording the location information, set Record GPS data in GPS options to On (default setting) (E87). • Operate in an open-air area when starting to receive signals from GPS satellites. C GPS Reception Indicator GPS reception can be checked on the shooting screen. GPS reception • n: Signals are being received from four or more satellites and determine position. Position information is recorded on the image. • o: Signals are being received from three satellites and determine position. Position information is recorded on the image. • z: Signals are being received from the satellite, but positioning is not possible. The position information recorded last is recorded on the image. • y: Signals cannot be received from the satellite, and positioning is not possible. The position information is not recorded on the image. C Pictures w...